Double Resonance Technology is particularly well adapted for medium/high powers.

In combination with IGBT, operating at high frequencies (50 kHz) provides significant improvements in terms of reliability and efficiency. Internal power dissipation, harmonics & ripple are higly reduced.

Four ranges of power are offered from 5000 W to 10000 W. This series of HV Power Supplies offers low stored energy suitable for many applications and supports with no problem short-circuits and arcs.

These generators are all based on a 19’’ rack or cabinet presentation with height depending on voltage and power proposed. An oil tank is integrated for the models from 20kV and above.

• Other Voltage and Current values available with no extracost*
• Reversibility and Floating outputs
• 4 1⁄2 digit display
• Non instrumented version
• Power regulation
• Arc Detection and counting
• RS232, GPIB and PROFIBUS interfaces
• Optic fibre transmission
• LABVIEW driver
• Relay interface
• Customer Remote Adaptation
• Single or multichannel consol unit
• Safety signs and devices alerting to Hazard
• Tropicalization
• Transportable “all terrain” container
• Specific AC or DC main power inputs
• OEM version
  Any Special requests can be considered

• Output Voltage and Output Current:
  Both Voltage Output and Current Output are continuously adjustable from 0 to 100 % (full scale)
  In local mode: by using 10 turns potentiometers resolution 0.05%
  In remote mode: by an external 0 to 10 V Voltage
• Voltage regulation:
  Load Regulation: ± 0.05 % of full voltage (for 0 – 100 % load change); ± 0.01% available on request.
  Line Regulation: ± 0.05 % of full voltage ( for Main Voltage ± 10 %); ± 0.01% available on request.
• Current regulation:
  Load Regulation: ± 0.05 % of full current (for 0 – 100 % load change)
  Line Regulation: ± 0.05 % of full current (for Main Voltage ± 10 %)
• Ripple + Noise:
  0.1 % p-p
• Setting Time:
  < 100 ms, 10 ms available on request.

• Stability after one hour of warm-up:
  0.01 % / hour , 0.03 % / 8 hours of operating with constant
  load and ambiant temperature.
• Temperature Coefficient: 100 ppm/°C
• Operating Temperature: from 0 to 40°C
• Efficiency: > 92 % full load
• Recovery Time After Arc: < 1 mS
• Stored Energy: 1J / kW
• Cooling by air: Dust filter fans on front panel. Easily removable
  filters for cleaning.
• Main Voltage: 400 VAC ± 10 % 47 – 63 Hz 3 Phases + Earth
• Power factor: > 0.98
• Calibration: with probes periodically approved by Authorized
  Measurement Laboratories
• CE Marking