Home > Test & Measurement > Current Transducers
We found 7 results matching your criteria.
Precision Current Transducers
Sort By:
Page of 1
Danisense DS200 current measurement sensor Danisense DS200

DS200 is member of the small housing sensor family. The family includes a 200A (1:500) and a 600A (1:1500) version.

Danisense DS600 current measurement sensor Danisense DS600

DS600 is member of the small housing sensor family. The family includes a 200A (1:500) and a 600A (1:1500) version.

Danisense DS2000 current measurement sensor Danisense DS2000

DS 2000 is developed to offer extreme linearity and full industrial temperature range.

Danisense DS5000 Fluxgate current transducer Danisense DS5000

The DS5000 is developed for very high current applications. It has all the protection of a smaller transducer, but also comes with an optional high precision burden board. (The board converting current to a 10V output voltage) With 150mm diameter in the center hole, most applications/primary conductors will fit. The standard configuration includes a 5m long cable between 19” Control Unit and Transducer Head and a mains cable.

DSSIU-4 Four Channel System Interface Unit Danisense DSSIU-4

DSSIU-4 is an interface unit capable of integrating up to 4xDS2000 into a complete current measuring system.

Danisense Power Supply Cable Danisense Power Supply Cable

A 5m (15ft) long power supply cable to be used with a standard DC Power Supply

Danisense Signal Output Cable Danisense Signal Output Cable

A 2m (6ft) long shielded signal output cable