Graphtec GL7000 Modular Data Acquisition Platform
£1562.50 (£1,875.00 inc VAT)
Available on back-order
The GL7000 is a module-expanding, high-speed, multi-function, multi-channel DATA PLATFORM. A maximum of 10 Amplifier Modules can be expanded, and expansion of an SSD Module and a Display Module makes it suitable for all sorts of needs. In addition to being able record measuring data on the built-in RAM, it also comes equipped with a large capacity flash memory. Since recording can be done to an SD card, transferring data to the PC when offline is easy. For the PC interface, as USB and Ethernet is included as standard, system configuration according to use is possible. As the Ethernet function is equipped with both a WEB server and an FTP server function, remote supervision and data transfer are also possible. Standard accessories... Alarm module, quick start guide, CD-ROM (user manual & application software) face cover, AC cable.
-
Graphtec B-513 Input / Output Cable
£99.75 -
Graphtec B-530 Humidity Sensor
£409.5 -
Graphtec B-559 Sync Cable for GL7000
£63 -
Graphtec B-560 Input Connector Screw Terminal
£100.8 -
Graphtec B-561 Input Cable
£100.8 -
Graphtec B-562 Output Cable
£52.5 -
Graphtec GL7-CHA Charge Module
£2173.5 -
Graphtec GL7-DCB Bridge Module
£2173.5 -
Graphtec GL7-DCO Voltage Output Module
£2656.5 -
Graphtec GL7-DISP Display Module
£918.75 -
Graphtec GL7-HSV High Speed Voltage Module
£1496.25 -
Graphtec GL7-HV High Voltage Module
£1496.25 -
Graphtec GL7-L/P Logic / Pulse Module
£1013.25 -
Graphtec GL7-M Voltage / Temperature Module
£1013.25 -
Graphtec GL7-SSD Solid State Drive Module
£1496.25 -
Graphtec GL7-V Voltage Module
£1496.25 -
Graphtec RIC-10 Logic Probe Set
£1049.99 -
Graphtec RIC-141A Safety Probe
£210 -
Graphtec RIC-142 BNC-BNC Input Cable
£84 -
Graphtec RIC-143 BNC-Banana Plugs Input Cable
£84 -
Graphtec RIC-144A Alligator Clips (small)
£1049.99 -
Graphtec RIC-145 Alligator Clips (medium)
£1049.99 -
Graphtec RIC-146 Grabber Clips
£1049.99
Optional Hardware Accessories
Documentation
Unit Specifications | |||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Number of module | Attached to up to 10 modules | ||||||||||||||||||||||
Number of input channels | Max. 112 channels in 1 of GL7000 | ||||||||||||||||||||||
External Input/Output signals |
|
||||||||||||||||||||||
Trigger, Alarm function |
|
||||||||||||||||||||||
Calculation function |
|
||||||||||||||||||||||
Move function of the display range | Beginning, center or end of the data, Trigger point, Specific time (absolute, relative), Call cursor | ||||||||||||||||||||||
Search function | Search for analogue signal levels, logic signal pattern, pulse signal levels or alarm point in captured data | ||||||||||||||||||||||
Annotation function | Comment can be set in each channel (up to 31 alphanumeric characters) | ||||||||||||||||||||||
Message / Marker Functions | Message: The registered messages or entered message is able to be recorded for any timing. Up to 8 messages can be pre-registered. Marker: Marker is able to record for occurring alarm or power failure. |
||||||||||||||||||||||
Resume | Resume automatically in the same condition after power is recovered as when the power failure occurred during data capture | ||||||||||||||||||||||
FFT analysis function (Firmware ver. 1.20 or later) |
|
||||||||||||||||||||||
Interface to PC | Ethernet (10 BASE-T/100 BASE-TX), USB 2.0 (High speed) | ||||||||||||||||||||||
Network function | WEB server, FTP server, FTP client, NTP client, DHCP client | ||||||||||||||||||||||
USB drive mode | Emulate the USB memory device | ||||||||||||||||||||||
Storage device |
|
||||||||||||||||||||||
Data saving function |
|
||||||||||||||||||||||
Engineering Scale function | Measured value can be converted to the engineering unit Analog voltage: Converts by four reference points (gain, offset) Temperature: Converts by two reference points (offset) Pulse count: Converts by two reference points (gain) |
||||||||||||||||||||||
Synchronization between units | Start and Trigger | ||||||||||||||||||||||
Accuracy of clock (at 23°C) | ±0.002% (Monthly deviation approx. 50 sec.) | ||||||||||||||||||||||
Operating environment | 0 to 40°C, 5 to 85% RH (non condensed) | ||||||||||||||||||||||
Power source | 100 to 240 V AC, 50 to 60Hz | ||||||||||||||||||||||
Power consumption | 110VA | ||||||||||||||||||||||
Standard accessories | Quick guide, CD-ROM, AC power cable | ||||||||||||||||||||||
External dimensions (W x D x H) | Main module: Approx. 193 x 141 x 160 mm (Excluding Projection), Alarm output terminal: Approx. 30 x 136 x 145 mm (Excluding projection) |
||||||||||||||||||||||
Weight | Main module: Approx. 2.2 kg, Alarm output terminal: Approx. 350 g |
Note*
Specifications are liable to change. For the full list of Specifications, please see the products datasheet located under the ‘Documentation’ tab.
Optional Accessories …
-
Graphtec GL7-L/P Logic / Pulse Module
£1,013.25 Add to basket -
Graphtec RIC-142 BNC-BNC Input Cable
£84.00 Add to basket -
Graphtec GL7-DISP Display Module
£918.75 Add to basket -
Graphtec GL7-DCO Voltage Output Module
£2,656.50 Add to basket -
Graphtec GL7-V Voltage Module
£1,496.25 Add to basket -
Graphtec B-513 Input / Output Cable
£99.75 Add to basket -
Graphtec GL7-SSD Solid State Drive Module
£1,496.25 Add to basket -
Graphtec RIC-146 Grabber Clips
£1,049.99 Add to basket -
Graphtec RIC-143 BNC-Banana Plugs Input Cable
£84.00 Add to basket -
Graphtec B-560 Input Connector Screw Terminal
£100.80 Add to basket -
Graphtec RIC-10 Logic Probe Set
£1,049.99 Add to basket -
Graphtec GL7-HSV High Speed Voltage Module
£1,496.25 Add to basket