Kikusui PBZ40-40SR Bi-Polar Power Supply +/- 0-40V +/- 0-40A

. (£ inc VAT)

Available on back-order

Description


Kikusui PBZ40-40SR Bi-Polar Power Supply

The PBZ is a high-voltage, large-current, fast-response, bipolar power supply. It supports four-quadrant operation, which means that it can source and sink both positive and negative voltages and currents. The internal AC signal or an external signal can be superimposed on the DC output. You can use the sequence feature to generate test signals for automotive and other electronic devices. Additionally, the PBZ can be used with a variety of loads to perform tests such as motor endurance tests, solenoid operation tests and capacitor ripple tests. Features:
  • Equipped with LAN Interface (LXI Compliance)
  • Isolation Voltage: 500Vdc max
  • Weight: Approx 110kg

Product Videos

Documentation

AC Input, Rated Output
Model PBZ20-60 SR PBZ20-80 SR PBZ20-100 SR PBZ40-30 SR PBZ40-40 SR PBZ40-50 SR
Input Rating
Nominal input voltage 200 Vac to 240 Vac 200 Vac to 240 Vac 200 Vac to 240 Vac 200 Vac to 240 Vac 200 Vac to 240 Vac 200 Vac to 240 Vac
Voltage range 180 Vac to 250 Vac 180 Vac to 250 Vac 180 Vac to 250 Vac 180 Vac to 250 Vac 180 Vac to 250 Vac 180 Vac to 250 Vac
Frequency range 47 Hz to 63 Hz 47 Hz to 63 Hz 47 Hz to 63 Hz 47 Hz to 63 Hz 47 Hz to 63 Hz 47 Hz to 63 Hz
Current 15Aac or less 20Aac or less 25Aac or less 15Aac or less 20Aac or less 25Aac or less
Inrush current 120Apeak or less 160Apeak or less 200Apeak or less 120Apeak or less 160Apeak or less 200Apeak or less
Power 2700VA or less 3600VA or less 4500VA or less 2700VA or less 3600VA or less 4500VA or less
Power factor 0.95 TYP (when the input voltage is 200 V) 0.95 TYP (when the input voltage is 200 V) 0.95 TYP (when the input voltage is 200 V) 0.95 TYP (when the input voltage is 200 V) 0.95 TYP (when the input voltage is 200 V) 0.95 TYP (when the input voltage is 200 V)
Output rating
Power 1200W 1600W 2000W 1200W 1600W 2000W
Voltage ± 20 V ± 20 V ± 20 V ± 40 V ± 40 V ± 40 V
Current ± 60 A ± 80 A ± 100 A ± 30 A ± 40 A ± 50 A
Output terminal
Output terminal Rear panel output terminals Rear panel output terminals Rear panel output terminals Rear panel output terminals Rear panel output terminals Rear panel output terminals
Isolation voltage 500 Vdc Only the output’s COM terminal can be grounded 500 Vdc Only the output’s COM terminal can be grounded 500 Vdc Only the output’s COM terminal can be grounded 500 Vdc Only the output’s COM terminal can be grounded 500 Vdc Only the output’s COM terminal can be grounded 500 Vdc Only the output’s COM terminal can be grounded
Constant Voltage (CV)
DC Voltage
Bipolar mode 0 V to ± (105 % of rating) 0 V to ± (105 % of rating) 0 V to ± (105 % of rating) 0 V to ± (105 % of rating) 0 V to ± (105 % of rating) 0 V to ± (105 % of rating)
Unipolar mode 0 V to ± (105 % of rating) 0 V to ± (105 % of rating) 0 V to ± (105 % of rating) 0 V to ± (105 % of rating) 0 V to ± (105 % of rating) 0 V to ± (105 % of rating)
Fine feature ± 5% of rating ± 5% of rating ± 5% of rating ± 5% of rating ± 5% of rating ± 5% of rating
Resolution 0.001 V (0.0001 V for the fine feature) 0.001 V (0.0001 V for the fine feature) 0.001 V (0.0001 V for the fine feature) 0.001 V (0.0001 V for the fine feature) 0.001 V (0.0001 V for the fine feature) 0.001 V (0.0001 V for the fine feature)
Accuracy ± (0.05 % of setting + 0.05 % of rating) ± (0.05 % of setting + 0.05 % of rating) ± (0.05 % of setting + 0.05 % of rating) ± (0.05 % of setting + 0.05 % of rating) ± (0.05 % of setting + 0.05 % of rating) ± (0.05 % of setting + 0.05 % of rating)
Temperature coefficient ±100 ppm / °C of rating (TYP) ±100 ppm / °C of rating (TYP) ±100 ppm / °C of rating (TYP) ±100 ppm / °C of rating (TYP) ±100 ppm / °C of rating (TYP) ±100 ppm / °C of rating (TYP)
AC Voltage
Settable range 0.00 Vpp to (210 % of rating) pp 0.00 Vpp to (210 % of rating) pp 0.00 Vpp to (210 % of rating) pp 0.00 Vpp to (210 % of rating) pp 0.00 Vpp to (210 % of rating) pp 0.00 Vpp to (210 % of rating) pp
Resolution 0.01 V 0.01 V 0.01 V 0.1 V 0.1 V 0.1 V
Accuracy ± 0.5 % of rating ± 0.5 % of rating ± 0.5 % of rating ± 0.5 % of rating ± 0.5 % of rating ± 0.5 % of rating
Settable range 0.01 Hz to 100.00 kHz 0.01 Hz to 100.00 kHz 0.01 Hz to 100.00 kHz 0.01 Hz to 100.00 kHz 0.01 Hz to 100.00 kHz 0.01 Hz to 100.00 kHz
Constant
voltage
characteristics
Frequency response DC to 100 kHz ( -3 dB) (TYP) DC to 100 kHz ( -3 dB) (TYP) DC to 100 kHz ( -3 dB) (TYP) DC to 100 kHz ( -3 dB) (TYP) DC to 100 kHz ( -3 dB) (TYP) DC to 100 kHz ( -3 dB) (TYP)
Response 3.5 μs, 10 μs, 35 μs, 100 μs 3.5 μs, 10 μs, 35 μs, 100 μs 3.5 μs, 10 μs, 35 μs, 100 μs 3.5 μs, 10 μs, 35 μs, 100 μs 3.5 μs, 10 μs, 35 μs, 100 μs 3.5 μs, 10 μs, 35 μs, 100 μs
Overshoot 5 % or less (TYP) 5 % or less (TYP) 5 % or less (TYP) 5 % or less (TYP) 5 % or less (TYP) 5 % or less (TYP)
Ripple
noise
p-p: 30 mV (TYP)
rms: 3 mV
p-p: 30 mV (TYP)
rms: 3 mV
p-p: 30 mV (TYP)
rms: 3 mV
p-p: 30 mV (TYP)
rms: 6 mV
p-p: 30 mV (TYP)
rms: 6 mV
p-p: 30 mV (TYP)
rms: 6 mV
Load effect ± (0.005 % of setting + 1 mV) ± (0.005 % of setting + 1 mV) ± (0.005 % of setting + 1 mV) ± (0.005 % of setting + 1 mV) ± (0.005 % of setting + 1 mV) ± (0.005 % of setting + 1 mV)
Source effect ± (0.005 % of setting + 1 mV) ± (0.005 % of setting + 1 mV) ± (0.005 % of setting + 1 mV) ± (0.005 % of setting + 1 mV) ± (0.005 % of setting + 1 mV) ± (0.005 % of setting + 1 mV)

Note* Specifications are liable to change. For the full list of Specifications, please see the products datasheet located under the ‘Documentation’ tab.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Mandatory Accessories …

  • UK Power Cord

    .
    Read more

Optional Accessories …

  • Kikusui KRB3-TOS Bracket

    £77.00
    Add to basket
  • Kikusui PK02-PBZ Parallel Operation Kit (for 2 units 19″ EIA Rack)

    £277.00
    Add to basket
  • Kikusui PK01-PBZ Parallel Operation Kit (for 2 units)

    £277.00
    Add to basket
  • Kikusui Wavy for PBZ

    £423.00
    Add to basket