Home > Electronic loads > Dynamic DC Electronic Loads >

Kikusui PLZ20005WH
Kikusui PLZ20005WH Electronic Loads

Kikusui PLZ20005WH


 
Alternative Views:


Kikusui PLZ20005WH DC Electronic Load

Call Telonic Instruments

Description DataSheet / Video
 
The PLZ-5WH high power DC electronic load series is where durable, reliable ingenuity meets multifunctional and high power design. Up to 20kW can be achieved with a single unit. Thanks to the highly power dense design of the PLZ-5WH, this series can sink up to 20kW of power in a single unit. Load simulation can be achieved faster than ever before thanks to the reliable, high speed design of the PLZ-5WH current control circuits. Accurate current measures can be made with extremely high setting resolution. A color LCD display allows for highly visible, user-friendly front panel operation. RS232C, USB, and LAN digital interfaces are included as standard for simple integration into any system.

Wide ranging operation voltage up to 800V:
Operating voltage ranges from 10V to 800V.
Minimum operating voltage required to sink current is 1.5V.

Maximum Slew Rate of 20 A /μs:
The PLZ-5WH series boasts a 20uS rise time, easily satisfying the critical needs of power supply evaluation tests demanding a fast transient response.
*When using the PLZ20005WH

Parallel Operation - Up to 100kW with parallel operation (Max. 5 units) :
The PLZ12005WH/PLZ20005WH can be connected in parallel to increase the maximum system capabilities up to 100kW. While connected in parallel, one master unit has complete control of the slave unit(s), allowing the user to control the entire system and monitor all data from the mater unit's front panel. Parallel operation requires one optional parallel cable for each slave unit (up to 4). The master and slave unit settings are configured automatically upon connection. Standalone settings automatically return to normal after removing parallel cable and restarting the unit.

Flexible communication interface:
LAN, USB and RS232C standard digital interface. *GPIB Option.

Arbitrary I-V characteristics (ARB) mode:
In ARB mode arbitrary I-V characteristics can be set by entering multiple I-V points (voltage and current value set points). 3 to 100 points can be registered and the spaces between all points are automatically linearly interpolated. The minimum voltage (0.00V0) and maximum voltage (808.00V) are fixed. This mode can be used for the simulation of LED drivers and other DUT's with non-linear characteristics.
Features
  • Operating voltage ranges from 10V to 800V
  • Minimum operating voltage required to sink current is 1.5V
  • Maximum Slew Rate of 20 A /μs
  • Up to 100kW with parallel operation (Max. 5 units)
  • Flexible communication interface: LAN, USB, RS232C. GPIB Optional.
  • Arbitrary I-V characteristics (ARB) mode

Share your knowledge of this product. Be the first to write a review »