Kikusui TOS6200A Earth Bond Tester 0-6VAC 3-30A

£1875.00 (£2,250.00 inc VAT)

Available on back-order

SKU: TOS6200A Category:

Kikusui TOS6200A Safety Tester

The Kikusui TOS6200A Earth Bond Tester is designed to perform the ground bond tests required for class-I devices by safety standards such as IEC, EN, VDE, BS, UL and JIS

Constant current method eliminates the need to reset test currents even in the face of fluctuating resistance values for the device being tested. The test duration can also be set from 0.3 s, making the tester suitable for production line testing, which requires reduced cycle time.

The TOS6200A features a large, easy-to-read display, memory capacity for storage of 100 types of test conditions, and incorporation of test conditions into programs to enable automatic testing. Standard GPIB and RS-232C interfaces allow the user to use PCs or other devices to control test conditions such as test current, resistance value for judgement, and test duration, and enables read-back of measured values and test results.
The tester is also provided with test leads as standard and provides high cost effectiveness.

Features:

  • Test current value: 3 to 30 A AC / Resistance value: 0.001 to 1.200 Ohm
  • Offset cancelling function
  • Stores 100 test conditions in memory
  • Incorporates test conditions into program
  • Contact Check function
  • Equipped with standard GPIB and RS-232C interfaces
  • Equipped with standard test lead

Description


Documentation

TOS6200A Specifications
Model TOS6200A
Output Block
Current Setting Range 3.0 Aac to 31.0 Aac
(With respect to resistance resulting in output power of the maximum rated Output or less and an output terminal voltage of 5.4 V or less)
Resolution 0.1 A
Accuracy ± (1% of setting + 0.2 A)
Maximum rated output 150 VA (at the output terminals)
Distortion factor 2% or less (with respect to 0.1 Ω pure resistance load of 10 A or greater)
Frequency 50/60 Hz, sine wave (selectable)
Accuracy ±200 ppm
Open terminal voltage 6 Vrms or less
Output method PWM switching method
Output Ammeter
Measurement range 0.0 Aac to 33.0 Aac
Resolution 0.1 A
Accuracy ± (1% of reading + 0.2 A)
Response Mean value response/rms value display (response time: 200 ms)
Holding function The current measured at the end of test is held during the PASS or FAIL inteval
Output Voltmeter
Measurement range 0.00 Vac to 6.00 Vac
Resolution 0.01 V
Accuracy ± (1% of reading + 0.02 V)
Response Mean value response/rms value display (response time: 200 ms)
Holding function The voltage measured at the end of test is held during the PASS or FAIL inteval
Ohmmeter
Measurement range 0.001 Ω to 1.200 Ω
Resolution 0.001 Ω
Offset cancel function 0.000 Ω to 1.200 Ω (Offset ON/OFF function provided)
Accuracy ± (2% of reading + 0.003 Ω)
Holding function The resistance measured at the end of test is held during the PASS interval
Environment
Operating environment Indoor use, Overvoltage Category II
Warranty range Temperature : 5°C to 35°C
Humidity : 20 %rh to 80 %rh (non condensing)
Operating range Temperature : 0°C to 40°C
Humidity : 20 %rh to 80 %rh (non condensing)
Storage range Temperature : -20°C to 70°C
Humidity : 90 %rh or less (non condensing)
Altitude Up to 2000 m
Power Requirement
Allowable voltage range 85 Vac to 250 Vac
Allowable frequency range 47 Hz to 63 Hz
Insulation resistance 30 MΩ min. (500 Vdc), between AC line and chassis
Withstanding voltage 1390 Vac (2 seconds), between AC line and chassis
Earth continuity 25 Aac/ 0.1 Ω max.

Note* Specifications are liable to change. For the full list of Specifications, please see the products datasheet located under the ‘Documentation’ tab.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Mandatory Accessories …

  • Kikusui TL11-TOS High Voltage Test Lead

    .
    Add to basket
  • UK Power Cord

    .
    Read more

Optional Accessories …

  • Kikusui 408J-102 2m GPIB Cable

    £167.00
    Add to basket
  • Kikusui RC02-TOS Remote Control Box

    £180.00
    Add to basket
  • Kikusui TL11-TOS High Voltage Test Lead

    £122.00

    2 in stock

    Availability: Stock models delivered next working day (UK only) for orders placed before 16:30 (Mon - Fri)

    Add to basket
  • Kikusui RC01-TOS Remote Control Box

    £153.00
    Add to basket
  • Kikusui 408J-101 1m GPIB Cable

    £151.00
    Add to basket
  • Kikusui LP01-TOS Test Probe

    £190.00
    Add to basket
  • Kikusui 408J-104 4m GPIB Cable

    £183.00
    Add to basket