NEW RSA5000 REAL-TIME SPECTRUM ANALYSER


NEW RSA5000 REAL-TIME SPECTRUM ANALYSER

NEW RSA5000 REAL-TIME SPECTRUM ANALYSER.

RIGOL Technologies announces a significant addition to its portfolio of RF Test Instrumentation with the introduction of the New RSA5000 Real-Time Spectrum Analyser.



The RSA5000 combines the power of a high performance swept spectrum analyser with superior Real-time performance unmatched in this product category. Available in 3.2GHz and 6.5GHz models all RSA5000 Series Analysers provide Resolution Bandwidth (RBW) down to 1Hz, a noise floor as low as -165dBm, and provide a full span sweep as fast as 1ms. In addition, the analyser features up to 40MHz of Real-time bandwidth, a minimum probability of intercept (POI) of 7.45 µs, 7 rich visualisation modes and powerful triggering capability, providing a complete analysis package for engineers developing and integrating today's wireless technologies.


"Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference," says Mike Rizzo, General Manager of RIGOL North America. "The RIGOL RSA5000 Real-Time Spectrum Analyzer brings the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems."


Unlike most analysers in this class RIGOL proudly specifies its Probability of Intercept performance. The RIGOL RSA5000 takes 146,484 FFTs per second providing a minimum 100% POI of 7.45 µs. This class leading performance allows users to confidently capture pulsing, hopping and fast transient signals as short as 7.45 µs and display accurate power 100% of the time. The RSA5000 provides 7 rich data views to allow engineers to visualize the most complex RF environments. Density Displays help to see time varying signals and resolve hidden and superimposed signals in the same frequency band. Spectrogram Displays allow users to evaluate changes in signal behaviour over time, especially useful in identifying hopping patterns and characterizing PLLs. Power versus Time Displays show the RF Power for the real time span over a user defined time span helping measure the duration and timing of pulsing signals and characterizing signals with amplitude modulation like ASK.


The RIGOL RSA5000 utilizes a quad core processor and is built on a Linux operating system. Its flexible user interface allows customers a choice in how they interact with their instrument. It has a 10.1" Capacitive Touch Display, supports a keyboard and mouse, or you can utilise traditional softkey and knob control. HDMI out allows use of a large external display and USB/LAN support allow easy networking, programming, remote control and data sharing.


Please contact Telonic Instruments Rigol’s UK representative for further information.