 |
 |
 |
 |
Discontinued, Please see the Function Generator table HERE.
The Rigol DG5000 series of Function / Arbitrary Waveform Generators combines many features in one unit; Function Generator, Arbitrary Waveform Generator, IQ Baseband Source / IQ IF Source, Frequency Hopping Source (optional) and Pattern Generator (optional). On dual-channel models, each channel is fully functional and the phase offset between each channel can be precisely controlled. The Rigol DG5000 series uses Direct Digital Synthesis (DDS) technology to provide stable, precise, pure, low distortion signals. It's user friendly interface is simple and intuitive to use. Each Rigol DG5000 series generator can be controlled remotely through any of its standard communication interfaces.
Click image to enlarge
The Rigol DG5000 series of Function / Arbitrary Waveform Generators combines many features in one unit; Function Generator, Arbitrary Waveform Generator, IQ Baseband Source / IQ IF Source, Frequency Hopping Source (optional) and Pattern Generator (optional). On dual-channel models, each channel is fully functional and the phase offset between each channel can be precisely controlled. The Rigol DG5000 series uses Direct Digital Synthesis (DDS) technology to provide stable, precise, pure, low distortion signals. It's user friendly interface is simple and intuitive to use. Each Rigol DG5000 series generator can be controlled remotely through any of its standard communication interfaces.
Click image to enlarge
-
- Model
-
| -
- DG5071
- DG5072
-
| -
- DG5101
- DG5102
-
| -
- DG5251
- DG5252
-
| -
- DG5351
- DG5352
-
| -
- Maximum Frequency
-
| -
- 70MHz
-
| -
- 100MHz
-
| -
- 250MHz
-
| -
- 350MHz
-
| -
- Channels
-
| -
- 1 (DG5xx1 models)
- 2 (DG5xx2 models)
-
| -
- Sample Rate
-
| -
- 1GSa/s
-
| -
- Waveforms
-
| -
- Basic
-
| -
- Sine, Square, Ramp, Pulse, Noise
-
| -
- Built-In Arbitrary
-
| -
- Sinc, Exponential Rise, Exponential Fall, ECG
- Gauss, HaverSine, Lorentz, Dual-Tone, DC
-
| -
- Frequency Characteristics
-
| -
- Sine
-
| -
- 1μHz to 70MHz
-
| -
- 1μHz to 100MHz
-
| -
- 1μHz to 250MHz
-
| -
- 1μHz to 350MHz
-
| -
- Square
-
| -
- 1μHz to 70MHz
-
| -
- 1μHz to 100MHz
-
| -
- 1μHz to 120MHz
-
| -
- Ramp
-
| -
- 1μHz to 3MHz
-
| -
- 1μHz to 5MHz
-
| -
- Pulse
-
| -
- 1μHz to 50MHz
-
| -
- Noise (-3dB)
-
| -
- 250MHz Bandwidth
-
| -
- Arbitrary Waveform
-
| -
- 1μHz to 50MHz
-
| -
- Resolution
-
| -
- 1μHz
-
| -
- Accuracy
-
| -
- ±2ppm, 18⁰C to 28⁰C
-
| -
- Sine Wave
- Spectral Purity
-
| -
- Harmonic Distortion
-
| -
- <-60dBc typical (DC to 10MHz)
- <-45dBc typical (f ≤ 100MHz)
- <-35dBc typical (f > 100MHz)
-
| -
- Total Harmonic Distortion
-
| -
- <0.5% (10Hz to 20kHz, 0dBm)
-
| -
- Spurious (Non-Harmonic)
-
| -
- <-50dBc (f ≤ 100MHz)
- <-50dBc + 6dB/octave (f > 100MHz)
-
| -
- Phase Noise
-
| -
- <-110dBc/Hz @ 10kHz offset (f = 10MHz, 0dBm)
-
| -
- Square Wave
-
| -
- Rise / Fall Time
-
| -
- <4ns typical (1Vpp)
-
| -
- <3ns typical (1Vpp)
-
| -
- <2.5ns typical (1Vpp)
-
| -
- Overshoot
-
| -
- ≤5% typical (1Vpp)
-
| -
- Duty Cycle
-
| -
- 20.0% to 80.0%, f ≤ 10MHz
- 40.0% to 60.0%, 10MHz < f ≤ 40MHz
- 50.0% Fixed, f > 40MHz
-
| -
- Non-Symmetry
-
| -
- 1% of the period + 5ns
-
| -
- Jitter (rms)
-
| -
- 10ppm + 500ps typical (f ≤ 30MHz)
- 500ps (f > 30MHz)
-
| -
- Ramp Waveform
-
| -
- Linearity
-
| -
- ≤0.5% of peak output, typical
-
| -
- Symmetry
-
| -
- 0% to 100%
-
| -
- Pulse
-
| -
- Period
-
| -
- 20ns to 1,000,000s
-
| -
- Pulse Width
-
| -
- ≥4ns to 1,000,000s
-
| -
- Rising / Falling Edge
-
| -
- 4ns to 1ms
-
| -
- 3ns to 1ms
-
| -
- 2.5ns to 1ms
-
| -
- Overshoot
-
| -
- <5% typical (1Vpp)
-
| -
- Jitter (rms)
-
| -
- 10ppm +500ps typical
-
| -
- Arbitrary Waveform
-
| -
- Length
-
| -
- 16pts
-
| -
- Waveform Length
-
| -
- Normal Mode: 2 to 16Mpts
- Play Mode: 2 to 128Mpts
-
| -
- Vertical Resolution
-
| -
- 14 bits
-
| -
- Mode
-
| -
- Normal Mode, Play Mode
-
| -
- Sample Rate
-
| -
- Normal Mode: 1GSa/s Fixed
- Play Mode: ≤1GSa/s Variable
-
| -
- Min. Rise / Fall Time
-
| -
- <3ns typical (1 Vpp)
-
| -
- Jitter (rms)
-
| -
- 3ns
-
| -
- Interpolation Method
-
| -
- Close, Linear, Sinc
-
| -
- Editing Mode
-
| -
- Point Edit, Block Edit
-
| -
- Output Characteristics
- (into 50Ω)
-
| -
- Amplitude Range
-
| -
- 5mVpp to 10Vpp (f ≤ 100MHz)
- 5mVpp to 5.0Vpp (f ≤ 300MHz)
- 5mVpp to 2.0Vpp (f ≤ 350MHz)
-
| -
- Amplitude Resolution
-
| -
- 0.1mVpp or 4 digits
-
| -
- Amplitude Accuracy
-
| -
- ±1% of the set value ±1mV, typical
-
| -
- Amplitude Flatness
-
| -
- ±0.1dB (f ≤ 10MHz)
- ±0.2dB (10MHz < f ≤ 60MHz)
- ±0.4dB (60MHz < f ≤ 100MHz)
- ±1.0dB (100MHz < f ≤ 150MHz)
- ±1.5dB (f > 250MHz)
-
| -
- Amplitude Units
-
| -
- Vpp, Vrms, dBm, High Level, Low Level
-
| -
- Offset Range
-
| -
- ±5V
-
| -
- Offset Accuracy
-
| -
- 1% of the set value + 5mV + 0.5% of the amplitude
-
| -
- Impedance
-
| -
- 50Ω
-
| -
- Protection
-
| -
- Over-Temperature Protection. Short-Circuit Protection.
- The overload relay automatically disables the main output
-
| -
- Modulation Characteristics
-
| -
- AM, FM, PM, ASK, FSK, PSK, PWM, IQ
-
| -
- IQ
-
| -
- Carrier Waveform
-
| -
- Sine (70MHz max.)
-
| -
- Sine (100MHz max.)
-
| -
- Sine (200MHz max.)
-
| -
- Source
-
| -
- Internal / External
-
| -
- Code Pattern
-
| -
- PN Sequence, 4 bit Code Pattern, User
-
| -
- IQ Mapping
-
| -
- 4QAM, 8QAM, 16QAM, 32QAM, 64QAM, BPSK, QPSK, OQPSK, 8PSK, 16PSK, User
-
| -
- Data Rate
-
| -
- 1bps to 1Mbps
-
| -
- Frequency Hopping Characteristics
-
| -
- FH Bandwidth
-
| -
- 1.5MHz to 70MHz
-
| -
- 1.5MHz to 100MHz
-
| -
- 1.5MHz to 250MHz
-
| -
- FH Rate
-
| -
- 1 hop/s to 12.5Mhops/s
-
| -
- Number of Frequency Points
-
| -
- 4096
-
| -
- Sequence Length
-
| -
- 4096
-
| -
- Burst Characteristics
-
| -
- Carrier Waveforms
-
| -
- Sine, Square, Ramp, Pulse, Noise, Arb (except DC)
-
| -
- Carrier Frequency
-
| -
- 1μHz to 70MHz
-
| -
- 1μHz to 100MHz
-
| -
- 1μHz to 120MHz
-
| -
- Burst Count
-
| -
- 1 to 1,000,000 or infinite
-
| -
- Start / Stop Phase
-
| -
- 0⁰ to 360⁰
-
| -
- Internal Period
-
| -
- 1μs to 500s
-
| -
- Gated Source
-
| -
- External Trigger
-
| -
- Trigger Source
-
| -
- Internal, External or Manual
-
| -
- Trigger Delay
-
| -
- 0ns to 85s
-
|
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Features
- 250MHz maximum sine-wave output frequency
- 1 channel
- 1GSa/s sample rate
- 14-bit resolution
- Up to 128Mpts editable arbitrary waveform
- Supported modulation: AM, FM, PM, ASK, FSK, PSK, PWM & IQ
- User defined IQ modulation & IQ baseband / IF output
- Separate adjustment of pulse rise / fall time
- Dual channel model supports frequency and phase coupling
- Store and recall waveform data and instrument state
- 4.3" (480 x 272) TFT LCD, 16M colours
- Signal Interfaces: Waveform output, synchronous signal output, modulation input, 10MHz reference input /output, trigger input/output
- Optional 16 channel digital output module
- Optional frequency hopping module
- Connectivity: USB Host & Device, LAN(LXI), GPIB
- PictBridge support
- Supplied with... BNC cable, SMB(F) to BNC(M) cable, USB cable, UK & European mains leads, quick guide, CD (including user guide & Ultra Station PC software)
- Optional Ultra Station Advanced PC software... Additional functionality for Ultra Station - Maths functions, digital filters & windowing
- Other options include... Frequency hopping module, logic signal output module, 10W power amplifier, 40dB attenuator, rack mount kit, RCL standard calibration, RCL UKAS calibration
|
|
 |
 |
 |
 |


|