 |
 |
 |
 |
The Rigol DG900 series offers a user-friendly and high-performance function/arbitrary waveform generator solution at a very attractive price. Each instrument provides many functions including; function generator, arbitrary waveform generator, noise source, pulse generator, harmonics generator, analogue / digital modulator and frequency counter. Any Rigol DG900 series function/arbitrary waveform generator would be a valuable asset in any home, business or education laboratory. For further information, please refer to the 'SPECIFICATION' and 'DOCUMENTS, SOFTWARE & VIDEOS' tabs, above.
Click image to enlarge
-
- Model
-
| -
- DG952
-
| -
- DG972
-
| -
- DG992
-
| -
- Channels
-
| -
- 2
-
| -
- Maximum Frequency
-
| -
- 50MHz
-
| -
- 70MHz
-
| -
- 100MHz
-
| -
- Sample Rate
-
| -
- 250MSa/s
-
| -
- Waveforms
-
| -
- Basic Waveforms
-
| -
- Sine, square, ramp, pulse, noise, DC, dual-tone
-
| -
- Advanced Waveforms
-
| -
- PRBS, RS232, sequence
-
| -
- Built-In Arbitrary Waveforms
-
| -
- 160-off, including: Sinc, exponential rise, exponential fall, ECG,
- Gauss, HaverSine, Lorentz, etc
-
| -
- Frequency Characteristics
-
| -
- Sine
-
| -
- 1μHz to 50MHz
-
| -
- 1μHz to 70MHz
-
| -
- 1μHz to 100MHz
-
| -
- Square
-
| -
- 1μHz to 15MHz
-
| -
- 1μHz to 20MHz
-
| -
- 1μHz to 25MHz
-
| -
- Ramp
-
| -
- 1μHz to 1.5MHz
-
| -
- 1μHz to 1.5MHz
-
| -
- 1μHz to 2MHz
-
| -
- Pulse
-
| -
- 1μHz to 15MHz
-
| -
- 1μHz to 20MHz
-
| -
- 1μHz to 25MHz
-
| -
- Harmonic
-
| -
- 1μHz to 20MHz
-
| -
- 1μHz to 20MHz
-
| -
- 1μHz to 25MHz
-
| -
- PRBS
-
| -
- 2kbps to 40Mbps
-
| -
- 2kbps to 50Mbps
-
| -
- 2kbps to 60Mbps
-
| -
- Dual-tone
-
| -
- 1μHz to 20MHz
-
| -
- 1μHz to 20MHz
-
| -
- 1μHz to 20MHz
-
| -
- RS232
-
| -
- baud rate range: 9600, 14400, 19200, 38400, 57600, 115200, 128000, 230400
-
| -
- Sequence
-
| -
- 2kSa/s to 60MSa/s
-
| -
- Noise (-3dB)
-
| -
- 100MHz bandwidth
-
| -
- Arbitrary Waveform
-
| -
- 1μHz to 15MHz
-
| -
- 1μHz to 20MHz
-
| -
- 1μHz to 20MHz
-
| -
- Resolution
-
| -
- 1μHz
-
| -
- Accuracy
-
| -
- ±(1ppm of the set value + 10pHz), 18⁰C to 28⁰C
-
| -
- Sine Wave Spectral Purity
-
| -
- Harmonic Distortion
-
| -
- <-55dBc typical (DC to 10MHz @ 0dBm)
- <-50dBc typical (10MHz to 20MHz @ 0dBm)
- <-40dBc typical (20MHz to 40MHz @ 0dBm)
- <-35dBc typical (>40MHz @ 0dBm)
-
| -
- Total Harmonic Distortion
-
| -
- <0.075% (10Hz to 20kHz @ 0dBm)
-
| -
- Spurious (Non-Harmonic)
-
| -
- <-60dBc (f ≤ 10MHz)
- <-60dBc + 6dB/octave (f > 10MHz)
-
| -
- Phase Noise
-
| -
- <-105dBc/Hz @ 10kHz offset (f = 10MHz @ 0dBm)
-
| -
- Signal Characteristics
-
| -
- Square Wave
-
| -
- Rise / Fall Time
-
| -
- ≤9ns typical (1Vpp, 1kHz)
-
| -
- Overshoot
-
| -
- ≤5% typical (1Vpp, 100kHz)
-
| -
- Duty Cycle
-
| -
- 0.01% to 99.99% (Limited by the current frequency setting)
-
| -
- Non-Symmetry
-
| -
- 1% of the period + 4ns
-
| -
- Jitter (rms)
-
| -
- 2ppm of the period + 200ps typical (f ≤ 5MHz, 1Vpp)
- 200ps (f > 5MHz, 1Vpp)
-
| -
- Ramp
-
| -
- Linearity
-
| -
- ≤1% of peak output, typical (1Vpp, 1kHz, 100% symmetry)
-
| -
- Symmetry
-
| -
- 0% to 100%
-
| -
- Pulse
-
| -
- Pulse Width
-
| -
- 16ns to 1000ks (Limited by the current frequency setting)
-
| -
- Duty
-
| -
- 0.001% to 99.999% (Limited by the current frequency setting and the pulse width setting)
-
| -
- Rising / Falling Edge
-
| -
- ≥8ns (Limited by the current frequency setting and the pulse width setting)
-
| -
- Overshoot
-
| -
- ≤5% typical (1Vpp, 1kHz)
-
| -
- Jitter (rms)
-
| -
- 2ppm of the period + 200ps typical (f ≤ 5MHz, 1Vpp)
- 200ps (f > 5MHz, 1Vpp)
-
| -
- Arbitrary Waveform
-
| -
- Maximum Length
-
| -
- 16Mpts
-
| -
- Vertical Resolution
-
| -
- 16 bits
-
| -
- Sample Rate
-
| -
- 10Sa/s to 60MSa/s (Interpolation filter)
- 2kSa/s to 50MSa/s (Step filter)
- 2kSa/s to 50MSa/s (Smooth filter)
-
| -
- Min. Rise / Fall Time
-
| -
- ≥8ns (Interpolation filter)
- 3.0/sample rate (Step filter)
- 1.0/sample rate (Smooth filter)
-
| -
- Jitter (rms)
-
| -
- ≥200ps typical (Interpolation filter, 1Vpp)
- <5ps typical (Step filter, 1Vpp)
- <5ps typical (Smooth filter, 1Vpp)
-
| -
- Overshoot
-
| -
- ≤5% typical (1Vpp)
-
| -
- Harmonic Generator
-
| -
- Harmonic Order
-
| -
- ≤8
-
| -
- Harmonic Type
-
| -
- Even Harmonic, Odd Harmonic, Order Harmonic, User
-
| -
- Harmonic Amplitude
-
| -
- The amplitude of each harmonic can be set independently
-
| -
- Harmonic Phase
-
| -
- The phase of each harmonic can be set independently
-
| -
- Output Characteristics
-
| -
- Amplitude (into 50Ω)
-
| -
- Range
-
| -
- 1.0mVpp to 10Vpp (f ≤ 10MHz)
- 1.0mVpp to 5.0Vpp (f ≤ 30MHz)
- 1.0mVpp to 2.5Vpp (f ≤ 60MHz)
- 1.0mVpp to 1.0Vpp (f > 60MHz)
-
| -
- Accuracy
-
| -
- ±1% of the set value ±5mV, typical (1kHz sine, 0V offset, >10mVpp, auto)
-
| -
- Flatness
-
| -
- ±0.1dB typical (f ≤ 5MHz)
- ±0.2dB typical (f ≤ 15MHz)
- ±0.3dB typical (f ≤ 25MHz)
- ±0.5dB typical (f ≤ 40MHz)
- ±1dB typical (f > 40MHz)
-
| -
- Units
-
| -
- Vpp, Vrms, dBm
-
| -
- Resolution
-
| -
- 0.1mVpp or 4 digits
-
| -
- Offset (into 50Ω)
-
| -
- Range
-
| -
- ±5Vpk AC + DC
-
| -
- Accuracy
-
| -
- ±(1% of the setting value + 5 mV + 1% of the amplitude)
-
| -
- Output
-
| -
- Impedance
-
| -
- 50 Ω typical
-
| -
- Protection
-
| -
- Short-circuit protection - The output is disabled automatically when an overload occurs
-
| -
- Modulation Characteristics
-
| -
- Types
-
| -
- AM, FM, PM, ASK, FSK, PSK, PWM
-
| -
- AM
-
| -
- Carrier Waveform
-
| -
- Sine, Square, Ramp, Arb
-
| -
- Source
-
| -
- Internal / External
-
| -
- Modulating Waveform
-
| -
- Sine, Square, Ramp, Noise, Arb
-
| -
- Modulation Depth
-
| -
- 0% to 120%
-
| -
- Modulation Frequency
-
| -
- 2mHz to 1MHz
-
| -
- FM
-
| -
- Carrier Waveform
-
| -
- Sine, Square, Ramp, Arb
-
| -
- Source
-
| -
- Internal / External
-
| -
- Modulating Waveform
-
| -
- Sine, Square, Ramp, Noise, Arb
-
| -
- Modulation Frequency
-
| -
- 2mHz to 1MHz
-
| -
- PM
-
| -
- Carrier Waveform
-
| -
- Sine, Square, Ramp, Arb
-
| -
- Source
-
| -
- Internal / External
-
| -
- Modulating Waveform
-
| -
- Sine, Square, Ramp, Noise, Arb
-
| -
- Modulation Deviation
-
| -
- 0° to 360°
-
| -
- Modulation Frequency
-
| -
- 2mHz to 1MHz
-
| -
- ASK
-
| -
- Carrier Waveform
-
| -
- Sine, Square, Ramp, Arb
-
| -
- Source
-
| -
- Internal / External
-
| -
- Modulating Waveform
-
| -
- Square with 50% duty cycle
-
| -
- Modulation Frequency
-
| -
- 2mHz to 1MHz
-
| -
- FSK
-
| -
- Carrier Waveform
-
| -
- Sine, Square, Ramp, Arb
-
| -
- Source
-
| -
- Internal / External
-
| -
- Modulating Waveform
-
| -
- Square with 50% duty cycle
-
| -
- Modulation Frequency
-
| -
- 2mHz to 1MHz
-
| -
- PSK
-
| -
- Carrier Waveform
-
| -
- Sine, Square, Ramp, Arb
-
| -
- Source
-
| -
- Internal / External
-
| -
- Modulating Waveform
-
| -
- Square with 50% duty cycle
-
| -
- Modulation Frequency
-
| -
- 2mHz to 1MHz
-
| -
- PWM
-
| -
- Carrier Waveform
-
| -
- Pulse
-
| -
- Source
-
| -
- Internal / External
-
| -
- Modulating Waveform
-
| -
- Sine, Square, Ramp, Noise, Arb
-
| -
- Width Deviation
-
| -
- 0% to 100% of the pulse width
-
| -
- Modulation Frequency
-
| -
- 2mHz to 1MHz
-
| -
- External Modulation Input
-
| -
- Input Range
-
| -
- 75mVrms to ±5Vac+dc (AM, FM, PM)
- 5V TTL (ASK, FSK, PSK)
-
| -
- Input Bandwidth
-
| -
- 50kHz
-
| -
- Input Impedance
-
| -
- 10kΩ
-
| -
- Burst Characteristics
-
| -
- Carrier Waveform
-
| -
- Sine, Square, Ramp, Pulse, Noise, Arb, PRBS, RS232, Sequence (except DC, dual-tone and Harmonic)
-
| -
- Carrier Frequency
-
| -
- 2mHz to 50MHz
-
| -
- 2mHz to 70MHz
-
| -
- 2mHz to 100MHz
-
| -
- Burst Count
-
| -
- 1 to 1,000,000 or Infinite
-
| -
- Internal Period
-
| -
- 1μs to 500s
-
| -
- Gated Source
-
| -
- External Trigger
-
| -
- Source
-
| -
- Internal, External, Manual
-
| -
- Trigger Delay
-
| -
- 0ns to 100s
-
| -
- Sweep Characteristics
-
| -
- Carrier Waveform
-
| -
- Sine, Square, Ramp, Arb
-
| -
- Type
-
| -
- Linear, Log, and Step
-
| -
- Orientation
-
| -
- Up / Down
-
| -
- Start / Stop Frequency
-
| -
- Same as the upper / lower limit of the corresponding carrier frequency
-
| -
- Sweep Time
-
| -
- 1ms to 500s
-
| -
- Hold / Return Time
-
| -
- 0ms to 500s
-
| -
- Source
-
| -
- Internal, External, Manual
-
| -
- Marker
-
| -
- Falling edge of the sync signal (programmable)
-
| -
- Frequency Counter
-
| -
- Measurement Function
-
| -
- Frequency, Period, Positive/Negative Pulse Width, Duty Cycle
-
| -
- Frequency Resolution
-
| -
- 7 digits/s (Gate Time = 1s)
-
| -
- Frequency Range
-
| -
- 1μHz to 240MHz
-
| -
- Voltage Range and Sensitivity (non-modulating signal)
-
| -
- DC Coupling
-
| -
- ±1.5 Vdc DC offset range
- 50mVrms to ±2.5Vac+dc, 1μHz to 100MHz
- 100mVrms to ±2.5Vac+dc, 100MHz to 240MHz
-
| -
- AC Coupling
-
| -
- 50mVrms to ±2.5Vpp, 1μHz to 100MHz
- 100mVrms to ±2.5Vpp, 100MHz to 240MHz
-
| -
- Pulse Width and Duty Cycle Measurement
-
| -
- Frequency Range
-
| -
- 1μHz to 25MHz
-
| -
- Amplitude Range
-
| -
- 50mVrms to ±2.5Vac+dc
-
| -
- Pulse Width
-
| -
- 20ns minimum
- 5ns resolution
-
| -
- Duty Measurement Range
-
| -
- 0% to 100%
-
| -
- Input Characteristics
-
| -
- Input Impedance
-
| -
- 1MΩ
-
| -
- Coupling Mode
-
| -
- AC & DC
-
| -
- Breakdown Voltage
-
| -
- ±7Vac+dc
-
| -
- High Frequency Rejection
-
| -
- On: Input Bandwidth = 150kHz
- Off: Input Bandwidth = 240MHz
-
| -
- Trigger Level Range
-
| -
- -2.5V to +2.5V
-
| -
- Trigger Sensitivity Range
-
| -
- High, Low
-
| -
- Trigger Characteristics
-
| -
- Trigger Input
-
| -
- Level
-
| -
- TTL-compatible
-
| -
- Slope
-
| -
- Rising or falling (selectable)
-
| -
- Pulse Width
-
| -
- >100ns
-
| -
- Latency
-
| -
- <100ns typical (sweep)
- <350ns typical (burst)
-
| -
- Trigger Output
-
| -
- Level
-
| -
- TTL-compatible
-
| -
- Pulse Width
-
| -
- >60ns typical
-
| -
- Maximum Frequency
-
| -
- 1MHz
-
| -
- Two-channel Characteristics - Phase Offset
-
| -
- Range
-
| -
- 0° to 360°
-
| -
- Waveform Phase Resolution
-
| -
- 0.03°
-
| -
- Reference Clock
-
| -
- External Reference Input
-
| -
- Lock Range
-
| -
- 10MHz ± 50Hz
-
| -
- Level
-
| -
- 250mVpp to 5Vpp
-
| -
- Lock Time
-
| -
- <2s
-
| -
- Input Impedance
-
| -
- 1kΩ typical (AC coupling)
-
| -
- Internal Reference Output
-
| -
- Frequency
-
| -
- 10MHz ± 50Hz
-
| -
- Level
-
| -
- 3.3Vpp
-
| -
- Output Impedance
-
| -
- 50Ω typical, (AC coupling)
-
| -
- Synchronous Output
-
| -
- Level
-
| -
- TTL-compatible
-
| -
- Impedance
-
| -
- 50Ω nominal
-
| -
- Protection
-
| -
- Over-Voltage
-
| -
- Occurs when:
- The instrument amplitude setting is greater than 3.2Vpp or the output AC+DC is greater than |1.6Vdc| and the input voltage is greater than ±12
- × (1 ± 5%)V (<10kHz). Disruptive discharge voltage: ±5Vac+dc.
- The instrument amplitude setting is smaller than or equal to 3.2Vpp or the output AC+DC is smaller than |1.6VDC| and the input voltage is
- greater than ±2.6 × (1 ± 5%)V (<10kHz). Disruptive discharge voltage: ±18Vac+dc.
-
| -
- Over-Current
-
| -
- Occurs when:
- The current is greater than ±240mA.
-
| -
- Programming Time
-
| -
- Configuration Changes
-
| -
- USB
-
| -
- Function Change
-
| -
- 10ms
-
| -
- Amplitude Change
-
| -
- 5ms
-
| -
- Frequency Change
-
| -
- 5ms
-
| -
- General Specifications
-
| -
- Communications Interfaces
-
| -
- USB Host & USB Device (standard)
- USB-LAN (optional)
-
| -
- Power Supply
-
| -
- Voltage
-
| -
- 100V to 127V (45Hz to 440Hz)
- 100V to 240V (45Hz to 65Hz)
-
| -
- Power Consumption
-
| -
- <30W
-
| -
- Display
-
| -
- Type
-
| -
- 4.3" TFT LCD touch-screen
-
| -
- Resolution
-
| -
- 480 × 272
-
| -
- Colour
-
| -
- 16M
-
| -
- Environmental
-
| -
- Temperature Range
-
| -
- 0℃ to 45℃ (operating)
- -40℃ to 60℃ (storage)
-
| -
- Cooling Method
-
| -
- Convection
-
| -
- Humidity Range
-
| -
- ≤95%RH (below 30℃)
- ≤75%RH (30℃ to 40℃)
- ≤45%RH (40℃ to 50℃)
-
| -
- Altitude
-
| -
- <3,000m (operating)
- <15,000m (non-operating)
-
| -
- Mechanical
-
| -
- Dimensions (W × H × D)
-
| -
- 238 × 97 × 266.6mm
-
| -
- Weight
-
| -
- 1.75kg (excluding the package)
- 2.85kg (including the package)
-
| -
- IP Protection
-
| -
- IP2X
-
| -
- Recommended Calibration Interval
-
| -
- 1 year
-
| -
- EMC
-
| -
- Compliant with EN61326-1:2006
-
| -
- IEC 61000-3-2:2000
-
| -
- ±4.0kV (contact discharge)
- ±4.0kV (air discharge)
-
| -
- IEC 61000-4-3:2002
-
| -
- 3V/m (80MHz to 1GHz)
- 3V/m (1.4GHz to 2GHz)
- 1V/m (2.0GHz to 2.7GHz)
-
| -
- IEC 61000-4-4:2004
-
| -
- 1kV power line
-
| -
- IEC 61000-4-5:2001
-
| -
- 0.5kV (phase-to-neutral voltage)
- 0.5kV (phase-to-earth voltage)
- 1kV (neutral-to-earth voltage)
-
| -
- IEC 61000-4-6:2003
-
| -
- 3V, 0.15MHz to 80MHz
-
| -
- IEC 61000-4-11:2004
-
| -
- Voltage dip: 0% UT during half-cycle, 0% UT during 1 cycle, 70% UT during 25 cycles
- Short interruption: 0% UT during 1 cycle
-
| -
- Electrical Safety
-
| -
- Complies with...
- EN 61010-1-2012
- USA: UL 61010-1:2012,
- Canada: CAN/CSA-C22.2
-
|
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Features
- Unique SiFiII (Signal Fidelity II) technology
- Two fully functional and independent channels
- Maximum frequency 50MHz
- 250MSa/s sample rate
- 16-bit vertical resolution
- Basic waveforms: Sine, square, ramp, pulse, noise, DC, dual-tone
- Advanced waveforms: PRBS, RS232, sequence
- 160-off built-in arbitrary waveforms
- 16Mpts arbitrary waveform memory depth per channel
- Supported modulation: AM, FM, PM, ASK, FSK, PSK & PWM
- Intuitive arbitrary waveform editing software for PC
- ±1ppm frequency stability
- Phase noise <-105dBc/Hz @ 10kHz (f = 10MHz)
- Built-in 7 digit counter up to 240MHz
- Built-in 8th order harmonics generator
- Waveform summing function
- 4.3" TFT LCD colour touch-screen display (480 x 272), 16M colours
- Connectivity... USB Host & Device, (USB-LAN optional)
- Standard accessories... UK & European mains leads, BNC cable, USB cable, quick guide
- Optional accessories... 40dB attenuator, USB to LAN module
- Other options include... Standard calibration (traceable to UK national standards), UKAS calibration
|
|
 |
 |
 |
 |


|