Sale!

Rigol DP2031 Linear DC Power Supply (32V/3A || 32V/3A || 6V/5A)

£860.00 (£1,032.00 inc VAT)

1 in stock (can be backordered)

Availability: Stock models delivered next working day (UK only) for orders placed before 16:30 (Mon - Fri)

Description


Rigol DP2031 Triple Output DC Power Supply

DP2000 series is a high-precision high-speed programmable linear power supply. In addition to basic functions such as low ripple and noise, fast transient response time, etc., it has three fully isolated channels, high precision, and high sampling rate. Among them, small current measurement. The resolution is up to 1μA, and the annual accuracy is 28μA. Colour touch screen, a variety of standard configuration interfaces, a variety of desktop and integrated testing requirements.
A major advantage of the linear DC power supply is the pure output. In the 20Hz-20MHz bandwidth, the DP2000 ripple and noise index is less than 350μVrms or 2 mVpp, ultra-low noise design, purer output, and minimizes any interference to the load. Your device provides a high-purity signal.

Features:

  • 3 electrically isolated independent channels with a maximum total power of 222 W
  • 4.3-inch LCD color touch screen
  • Internal series/parallel connections for CH1 and CH2
  • High resolution for measurement of 1 μA low range current
  • Capability to measure and display wide dynamic ranges of current
  • Excellent programming/readback accuracy
  • Transient response time <50 μs
  • Front and rear output terminals
  • 2-wire or 4-wire remote sense
  • A maximum of 512 arbitrary points with dwell time down to 1 ms; various built-in basic waveforms
  • Low output ripple and noise <350 μVrms/2 mVpp
  • Command processing time <10 ms
  • Automatic switchover between low and high range measurement
  • Timing output, energy consumption analysis (IoT), data logging and analysis
  • Capability to measure the minimum of 1 ms pulse current
  • Three rack-units (3U), 1/2-rack form factor
  • Software control
  • Over voltage, over current, and over temperature protection
  • Various interfaces available: USB HOST, LAN, Digital I/O, and RS232 standard.

Rigol DP800 DC Power Supply Comparison Table

Model Output Voltage Output Current Bench/Rack Control
DP811 Ch 1: 0V - 20V / 0V - 40V Ch 2: N/A Ch 3: N/A Ch 1: 10A / 5A Ch 2: N/A Ch 3: N/A Bench / Rack (Opt) USB Device, USB Host, LAN (Opt), RS232 (Opt), Digital I/O (Opt), USB-GPIB (Opt)
DP811A Ch 1: 0V - 20V / 0V - 40V Ch 2: N/A Ch 3: N/A Ch 1: 10A / 5A Ch 2: N/A Ch 3: N/A Bench / Rack (Opt) USB Device, USB Host, LAN, RS232, Digital I/O, USB-GPIB (Opt)
DP821 Ch 1: 0V - 60V Ch 2 : 0V - 8V Ch 3 : N/A Ch 1: 1A Ch 2: 10A Ch 3: N/A Bench / Rack (Opt) USB Device, USB Host, LAN (Opt), RS232 (Opt), Digital I/O (Opt), USB-GPIB (Opt)
DP821A Ch 1: 0V - 60V Ch 2 : 0V - 8V Ch 3 : N/A Ch 1: 1A Ch 2: 10A Ch 3: N/A Bench / Rack (Opt) USB Device, USB Host, LAN, RS232, Digital I/O, USB-GPIB (Opt)
DP831 Ch 1: 0V - 8V Ch 2: 0V - 30V Ch 3: 0V - (-)30V Ch 1: 5A Ch 2: 2A Ch 3: 2A Bench / Rack (Opt) USB Device, USB Host, LAN (Opt), RS232 (Opt), Digital I/O (Opt), USB-GPIB (Opt)
DP2031 Ch 1: 0V - 32V Ch 2: 0V - 32V Ch 3: 0V - 6V Ch 1: 3A Ch 2: 3A Ch 3: 5A(10A) Bench / Rack (Opt) USB Device, USB Host, LAN, RS232, Digital I/O
DP832 Ch 1: 0V - 30V Ch 2: 0V - 30V Ch 3: 0V - 5V Ch 1: 3A Ch 2: 3A Ch 3: 3A Bench / Rack (Opt) USB Device, USB Host, LAN (Opt), RS232 (Opt), Digital I/O (Opt), USB-GPIB (Opt)
DP832A Ch 1: 0V - 30V Ch 2: 0V - 30V Ch 3: 0V - 5V Ch 1: 3A Ch 2: 3A Ch 3: 3A Bench / Rack (Opt) USB Device, USB Host, LAN, RS232, Digital I/O, USB-GPIB (Opt)

Documentation

DC Output (0°C to 40°C)
Model DP811A DP821A DP831A DP832A
Voltage/Current Rating Range 1: 0 to 20V/0 to 10A
Range 2: 0 to 40V/0 to 5A
CH1: 0 to 60V/0 to 1A
CH2: 0 to 8V/0 to 10A
CH1: 0 to 8V/0 to 5A
CH2: 0 to 30V/0 to 2A
CH3: 0 to -30V/0 to 2A
CH1: 0 to 30V/0 to 3A
CH2: 0 to 30V/0 to 3A
CH3: 0 to 5V/0 to 3A
OVP/OCP Range 1: 1mV to 22V/0.1mA to 11A
Range 2: 1mV to 44V/0.1mA to 5.5A
CH1: 1mV to 66V/0.1mA to 1.1A
CH2: 1mV to 8.8V/1mA to 11A
CH1: 1mV to 8.8V/0.1mA to 5.5A
CH2: 1mV to 33V/0.1mA to 2.2A
CH3: -1mV to -33V/0.1mA to 2.2A
CH1: 1mV to 33V/1mA to 3.3A
CH2: 1mV to 33V/1mA to 3.3A
CH3: 1mV to 5.5V/1mA to 3.3A
Load Regulation Rate ± (Output Percentage + Offset)
Voltage <0.01% + 2mV <0.01% + 2mV <0.01% + 2mV <0.01% + 2mV
Current <0.01% + 250μA <0.01% + 250μA <0.01% + 250μA <0.01% + 250μA
Linear Regulation Rate ± (Output Percentage + Offset)
Voltage <0.01% + 2mV <0.01% + 2mV <0.01% + 2mV <0.01% + 2mV
Current <0.01% + 250μA <0.01% + 250μA <0.01% + 250μA <0.01% + 250μA
Ripples and Noise (20Hz to 20MHz)
Voltage DP832A/DP831A/DP821A: <350μVrms/2mVpp
DP811A: <350μVrms/3mVpp
DP832A/DP831A/DP821A: <350μVrms/2mVpp
DP811A: <350μVrms/3mVpp
DP832A/DP831A/DP821A: <350μVrms/2mVpp
DP811A: <350μVrms/3mVpp
DP832A/DP831A/DP821A: <350μVrms/2mVpp
DP811A: <350μVrms/3mVpp
Current <2mArms <2mArms <2mArms <2mArms
Transient Response Time
Transient Response Time Less than 50μs for output voltage to recover to within 15mV following a change in output current from full load to half load or vice
versa.
Less than 50μs for output voltage to recover to within 15mV following a change in output current from full load to half load or vice
versa.
Less than 50μs for output voltage to recover to within 15mV following a change in output current from full load to half load or vice
versa.
Less than 50μs for output voltage to recover to within 15mV following a change in output current from full load to half load or vice
versa.
Command Processing Time
Command Processing Time <118ms <118ms <118ms <118ms

Note* Specifications are liable to change. For the full list of Specifications, please see the products datasheet located under the ‘Documentation’ tab.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Mandatory Accessories …

  • UK Power Cord

    .
    Read more

Optional Accessories …

  • Rigol HIRES-DP800 High Resolution Licence

    £80.00
    Add to basket
  • Rigol RM-1-DP800 Rack Mount Kit

    £107.00
    Add to basket
  • Rigol RM-2-DP800 Rack Mount Kit

    £98.00
    Add to basket
  • Rigol DIGITALIO-DP800 Trigger Channels Licence

    £80.00
    Add to basket
  • Rigol INTERFACE-DP800 RS232 & LAN Licence

    £107.00
    Add to basket
  • Rigol AFK-DP800 Online Monitor & Analysis Functions Licence

    £80.00
    Add to basket