Sale!

Rigol DS1102E 100MHz Digital Oscilloscope

(2 customer reviews)

£317.00 (£380.40 inc VAT)

2 in stock (can be backordered)

Availability: Stock models delivered next working day (UK only) for orders placed before 16:30 (Mon - Fri)

Rigol DS1102E Digital Oscilloscope

The Rigol DS1102E, 100MHz, 1GSa/s, 2-channel digital oscilloscope offers excellent value for money. It’s features include; a memory depth of 1Mpts, versatile trigger functions, maths functions including the FFT and digital filters, record and replay, roll mode, alternate trigger mode and pass / fail test. Several options are available – Please refer to the “Optional Accessories” tab above.

Features:

  • 100MHz bandwidth, 2 channels
  • 1GSa/s real time sample rate
  • Memory depth up to 1Mpts
  • Versatile trigger functions
  • 5.7″ QVGA (320 x 240) display
  • Waveform record and replay function
  • Built-in FFT and digital filters
  • Pass/fail test
  • PictBridge support
  • Connectivity: USB Host & Device, RS232
  • Supplied with… 2-off passive probes (150MHz), USB cable, UK & European mains leads, quick guide
  • Options include… USB-GPIB module, soft carry bag, RCL Standard Calibration, RCL 17025 Calibration

Rigol DS1000E Oscilloscope Comparison Table

Model Channels Bandwidth Max Sample Rate Equivalent-Time Sample Rate Rise Time Trigger Modes
DS1052E 2 50MHz 1GSa/s (1CH) 500MSa/s (2CH) 10GSa/s 7ns Edge, Video, Pulse, Slope, Alternate
DS1102E 2 100MHz 1GSa/s (1CH) 500MSa/s (2CH) 25GSa/s 3.5ns Edge, Video, Pulse, Slope, Alternate

Description


Documentation

Acquisition
Sampling Modes Real-Time
Sampling Rate 1GSa/s, 200MSa/s
Averages N time acquisitions, all channels simultaneously, N is selectable from 2, 4, 8, 16, 32, 64, 128 and 256.
Input
Input Coupling DC, AC, GND
Input Impedance 1MΩ± 2%, in parallel with 15pF± 3pF
Probe Attenuation Factors 1X, 5X, 10X, 50X, 100X, 500X,1000X
Maximum Input Voltage 400V (DC+AC Peak, 1MΩ input impedance)
40V (DC+AC Peak)
Time Delay Between Channel (typical) 500ps
Horizontal
Sample Rate Range Real-Time: 13.65Sa/s-1GSa/s
Equivalent: 13.65Sa/s-25GSa/s
Waveform Interpolation Sin(x)/x
Scan Speed Range 2ns/div~50s/div, DS1102X
5ns/div~50s/div, DS1052X
1-2-5 Sequence
Sample Rate and Delay Time ± 50ppm (over any 1ms time interval)
Delta Time Measurement Accuracy (Full Bandwidth) Single-shot: ± (1 sample interval + 50ppm × reading + 0.6 ns)
>16 averages: ± (1sample interval + 50ppm × reading + 0.4 ns)
Vertical
A/D Converter 8-bit resolution, each channel samples simultaneously[2]
Volts/div Range 2mV/div~10V/div at input BNC
Maximum Input Analog channel maximum input voltage
CAT I 300Vrms, 1000Vpk;instantaneous voltage 1000Vpk CAT II 100Vrms,1000Vpk
RP2200 10:1:CAT II 300Vrms RP3200 10:1:CAT II 300Vrms RP3300 10:1:CAT II 300Vrms
Offset Range ± 40V(200mV-10V), ± 2V(2mV-100mV)
Analogue Bandwidth 100MHz (DS1102D,DS1102E)
50MHz (DS1052D, DS1052E)
Single-shot Bandwidth 80MHz (DS1102D, DS1102E)
50MHz (DS1052D, DS1052E)
Selectable Analog Bandwidth Limit (typical) 20MHz
Lower Frequency Limit (AC –3dB) ≤5Hz (at input BNC)
Rise Time at BNC, typical <3.5ns, <7ns,
On (100M, 50M) respectively
DC Gain Accuracy 2mV/div-5mV/div:
± 4% (Sample or Average acquisition mode) 10mV/div-10V/div:
± 3% (Sample or Average acquisition mode)
DC Measurement Accuracy, Average Acquisition Mode Average of ≥16 Waveforms with vertical position at zero: ± (DC Gain Accuracy× reading+0.1div+1mV)
Average of ≥16 Waveforms with vertical position not at zero: ±[DC Gain Accuracy× (reading+vertical position)+(1% of vertical position) + 0.2div]
Add 2mV for settings from 2mV/div to 200 mV/div
Delta Volts Measurement Accuracy (Average Acquisition Mode) Delta Volts between any two averages of 16 waveforms acquired under same setup and ambient
conditions: ± (DC Gain Accuracy× reading + 0.05 div)
Trigger
Trigger Sensitivity 0.1div~1.0div (adjustable)
Trigger Level Range Internal: ± 5 divisions from center of screen
External: ± 1.2V
Trigger Level Accuracy (typical) applicable for the signal of rising and falling time ≥20ns Internal: ± (0.3div × V/div)(± 4 divisions from center of screen)
External: ± (6% of setting + 200 mV)
Trigger Offset Normal mode: pre-trigger (262144/ sampling rate), delayed trigger 1s
Slow Scan mode: pre-trigger 6div, delayed trigger 6div
Trigger Holdoff range 100ns~1.5s
Set Level to 50% (Typical) Input signal frequency ≥50Hz
Edge trigger slope Rising, Falling, Rising + Falling
Trigger condition (>, <, =) Positive pulse, (>, <, =) negative pulse
Pulse Width range 20ns ~10s
Video standard & line frequency Support standard NTSC, PAL and SECAM broadcast systems. Line number range: 1~525 (NTSC) and 1~625 (PAL/SECAM)
Trigger condition (>, <, =) Positive slope, (>, <, =) negative slope
Time setting 20ns~10s
Trigger on CH1 Edge, Pulse, Video, Slope
Trigger on CH2 Edge, Pulse, Video, Slope
Trigger mode D0~D15 select H, L, X, ,
Trigger Type D0~D15 select H, L, X
Qualifier >, <, =
Time setup 20ns~10s
Measure
Cursor Manual mode:
Voltage difference between cursors (∆V) Time difference between cursors (∆T) Reciprocal of ∆T in Hertz (1/∆T)Track: Voltage value for Y-axis waveform Time value for X-axis waveformAuto: Cursors are visible for Automatic Measurement
Auto Measurement Vpp, Vamp, Vmax, Vmin, Vtop, Vbase, Vavg, Vrms, Overshoot, Preshoot, Freq, Period, Rise Time, Fall Time, +Width, -Width, +Duty, -Duty, Delay1→2 , Delay1→2
Display
Display Type 5.7 in. (145 mm) diagonal TFT Liquid Crystal Display
Display Resolution 320 horizontal × RGB× 234 vertical pixels
Display Colour 64K color
Display Contrast (typical) 150:1
Backlight Brightness (typical) 300 nit
I/O
Standard Ports USB Host, USB Device, LAN, AUX Output (TrigOut/PassFail)
General Specifications
Supply Voltage 100 ~ 240 VACRMS, 45~440Hz, CAT II
Power Consumption Less than 50W
Fuse 2A, T rating, 250 V
Ambient Temperature Operating 10℃~ 40℃, Non-operating -20℃~ +60℃
Cooling Method Fan force air flow
Humidity +35℃ or below: ≤90% relative humidity, +35℃~ +40℃: ≤60% relative humidity
Altitude Operating 3,000 m or below, Non-operating 15,000 m or below
Size W: 303mm,  H: 154mm, D: 133mm
Weight Without Package: 2.4kg, Packaged: 3.8 kg
Calibration Interval The recommended calibration interval is one year

Note*

Specifications are liable to change. For the full list of Specifications, please see the products datasheet located under the ‘Documentation’ tab.

2 reviews for Rigol DS1102E 100MHz Digital Oscilloscope

  1. Charles E

    A great entry level oscilloscope with plenty of functionality. Manual (downloadable) is clear and well written.

  2. Alex

    Well worth the money

Only logged in customers who have purchased this product may leave a review.

You may also like…

  • 4007 Sensepeek PCBite Kit (Large Base Plate)

    £69.98

    3 in stock (can be backordered)

    Availability: Stock models delivered next working day (UK only) for orders placed before 16:30 (Mon - Fri)

    Add to basket
  • 4015 Sensepeek PCBite Kit with 2 x SP100 100MHz Handsfree Oscilloscope Probe

    £142.22

    10+ In UK Stock

    Availability: Stock models delivered next working day (UK only) for orders placed before 16:30 (Mon - Fri)

    Add to basket
  • 4002 Sensepeek PCBite Kit (Small Base Plate)

    £60.95

    5+ In UK Stock

    Availability: Stock models delivered next working day (UK only) for orders placed before 16:30 (Mon - Fri)

    Add to basket

Mandatory Accessories …

  • Passive Oscilloscope Probe

    Rigol 2x PVP2150 150MHz Passive Oscilloscope Probes

    .
    Add to basket

Optional Accessories …

  • Placeholder

    Rigol RP1005C 300A Peak Current Probe

    £3,926.00
    Add to basket
  • Rigol RP1006C 500A Peak Current Probe

    £4,256.00
    Add to basket
  • Rigol RP1004C 50A Peak Current Probe

    £4,030.00
    Add to basket
  • Rigol BAG-DS1000 Soft Carry Bag

    £51.00

    1 in stock (can be backordered)

    Availability: Stock models delivered next working day (UK only) for orders placed before 16:30 (Mon - Fri)

    Add to basket
  • Micsig ACP1000 AC Current Probe

    £220.40

    3 in stock (can be backordered)

    Availability: Stock models delivered next working day (UK only) for orders placed before 16:30 (Mon - Fri)

    Add to basket
  • BNC Cable (2m)

    £15.75

    5+ In UK Stock

    Availability: Stock models delivered next working day (UK only) for orders placed before 16:30 (Mon - Fri)

    Add to basket
  • Micsig DP10013 100MHz, ±1300V, 50X / 500X High Voltage Differential Oscilloscope Probe

    £145.13

    3 in stock (can be backordered)

    Availability: Stock models delivered next working day (UK only) for orders placed before 16:30 (Mon - Fri)

    Add to basket
  • 4007 Sensepeek PCBite Kit (Large Base Plate)

    £69.98

    3 in stock (can be backordered)

    Availability: Stock models delivered next working day (UK only) for orders placed before 16:30 (Mon - Fri)

    Add to basket
  • Micsig DP10007 ±70V 10X ±700 100X Differential Probe

    £161.25

    2 in stock (can be backordered)

    Availability: Stock models delivered next working day (UK only) for orders placed before 16:30 (Mon - Fri)

    Add to basket
  • Micsig DP20003 100MHz, X200 / X2000, 5600V High Voltage Differential Probe

    £198.88

    5+ In UK Stock

    Availability: Stock models delivered next working day (UK only) for orders placed before 16:30 (Mon - Fri)

    Add to basket
  • Rigol RP1003C 50A Peak Current Probe

    £2,865.00
    Add to basket
  • 4002 Sensepeek PCBite Kit (Small Base Plate)

    £60.95

    5+ In UK Stock

    Availability: Stock models delivered next working day (UK only) for orders placed before 16:30 (Mon - Fri)

    Add to basket