 |
 |
 |
|
Rigol RSA5000 series real-time spectrum analysers combines the power of a high-performance conventional spectrum analyser with superior real-time performance, unmatched in this product category. Available in 3.2GHz and 6.5GHz models, all RSA5000 series analysers provide a resolution bandwidth (RBW) down to 1Hz, a noise floor as low as -165dBm/Hz and a full span sweep as fast as 1ms. In addition, the analyser features up to 40MHz of real-time bandwidth (optional), a minimum probability of intercept (POI) of 7.45µs, 7-rich visualisation modes and powerful triggering capability. The Rigol RSA5000 series is a complete analysis package for engineers developing and integrating todays wireless technologies utilising complex and dynamic modulation schemes.
For further information, please refer to the 'SPECIFICATION' and 'DOCUMENTS, SOFTWARE & VIDEOS' tabs, above.
An overview of all Rigol spectrum analysers can be found HERE.
Click image to enlarge
Product Videos
-
- Model
-
| -
- RSA5032
-
RSA5032-TG -
| -
- RSA5065
-
RSA5065-TG -
| -
-
ALL MEASUREMENT MODES -
| -
- Frequency
-
| -
- Frequency
-
| -
- Range
-
| -
- 9kHz - 3.2GHz
-
| -
- 9kHz - 6.5GHz
-
| -
- Internal Reference
-
| -
- Frequency
-
| -
- 10MHz
-
| -
- Accuracy
-
| -
- ±(time since last calibration x aging rate + temperature stability + calibration accuracy)
-
| -
- Initial Calibration Accuracy
-
| -
- <1ppm (standard)
-
<0.1ppm (optional) -
| -
- Temperature Stability [1]
-
| -
- <0.5ppm (standard)
-
<0.005ppm (optional) -
| -
- Aging Rate
-
| -
- <1ppm/year (standard)
-
<0.03ppm/year (optional) -
| -
-
GENERAL PURPOSE SPECTRUM ANALYSER (GPSA) MODE -
| -
- Frequency
-
| -
- Frequency Readout Accuracy
-
| -
- Marker Frequency Resolution
-
| -
- span/(number of sweep points - 1)
-
| -
- Marker Frequency Uncertainty
-
| -
- ±(marker frequency readout × reference frequency accuracy + 1% × span + 10% × resolution bandwidth + marker frequency resolution)
-
| -
- Frequency Counter
-
| -
- Resolution
-
| -
- 1Hz
-
| -
- Uncertainty
-
| -
- ±(marker frequency readout × reference frequency accuracy + counter resolution)
-
| -
- Frequency Span
-
| -
- Range
-
| -
- 0 Hz, 10 Hz to maximum frequency
-
| -
- Resolution
-
| -
- 2Hz
-
| -
- Uncertainty
-
| -
- ±span/(number of sweep points - 1)
-
| -
- SSB Phase Noise [2]
-
| -
- @ 1kHz offset
-
| -
- <-95dBc/Hz typ.
-
| -
- @ 10kHz offset
-
| -
- <-106dBc/Hz, <-108dBc/Hz typ.
-
| -
- @ 100kHz offset
-
| -
- <-106dBc/Hz, <-108dBc/Hz typ.
-
| -
- @ 1MHz offset
-
| -
- <-115dBc/Hz, <-117dBc/Hz typ.
-
| -
- Residual FM
-
| -
- <10Hz nom., (20⁰C to 30⁰C, RBW = VBW = 1kHz)
-
| -
- Bandwidth
-
('Sweep Time Rule' = 'Accy') -
| -
- Resolution Bandwidth (-3dB)
-
| -
- 1Hz to 10MHz, in 1-3-10 sequence
-
| -
- RBW Accuracy
-
| -
- <5% nom.
-
| -
- Resolution Filter Shape Factor (60dB: 3dB)
-
| -
- <5 nom.
-
| -
- Video Bandwidth (-3dB)
-
| -
- 1Hz to 10MHz, in 1-3-10 sequence
-
| -
- Resolution Bandwidth (-6dB)
-
| -
- 200Hz, 9kHz, 120kHz, 1MHz
-
| -
- Amplitude
-
| -
- Measurement Range
-
| -
- DANL to +30dBm (f
- c ≥10MHz)
-
| -
- Maximum Safe Input Level
-
| -
- DC Voltage
-
| -
- 50V
-
| -
- CW RF Power
-
| -
- +30dBm (attenuation ≥ 40dB, preamp OFF)
-
-10dBm (attenuation = 20dB, preamp ON) -
| -
- Damage Level
-
| -
- +33 dBm (2W)
-
| -
- Displayed Average Noise Level, DANL [3]
-
| -
- Preamplifier Off
-
| -
- <-120dBm typ. (9kHz to 100kHz)
-
<-135dBm, <-140dBm typ. (100kHz to 20MHz) -
<-142dBm, <-145dBm typ. (20MHz to 1.5GHz) -
<-140dBm, <-143dBm typ. (1.5GHz to 2.7GHz) -
<-138dBm, <-141dBm typ. (2.7GHz to 3.2GHz) -
<-138dBm, <-143dBm typ. (3.2GHz to 5.5GHz) -
<-136dBm, <-141dBm typ. (5.5GHz to 6.5GHz) -
| -
- Preamplifier On
-
| -
- <-152dBm, <-160dBm typ. (100kHz to 20MHz)
-
<-162dBm, <-165dBm typ. (20MHz to 1.5GHz) -
<-160dBm, <-163dBm typ. (1.5GHz to 2.7GHz) -
<-158dBm, <-161dBm typ. (2.7GHz to 3.2GHz) -
<-156dBm, <-161dBm typ. (3.2GHz to 5.5GHz) -
<-154dBm, <-159dBm typ. (5.5GHz to 6.5GHz) -
| -
- Level Display
-
| -
- Logarithmic Scale
-
| -
- 1dB to 200dB
-
| -
- Linear Scale
-
| -
- 0 to Reference Level
-
| -
- Number of Display Points
-
| -
- 801
-
| -
- Number of Traces
-
| -
- 6
-
| -
- Trace Detectors
-
| -
- Normal, Positive-Peak, Negative-Peak, Sample, RMS, Voltage Average and Quasi-Peak
-
| -
- Trace Functions
-
| -
- Clear Write, Max Hold, Min Hold, Average, View, Blank
-
| -
- Units
-
| -
- dBm, dBmV, dBμV, nV, μV, mV, V, nW, μW, mW, W
-
| -
- Frequency Response
-
| -
- Preamplifier Off [4]
-
| -
- <0.5dB, <0.3dB typ. (100kHz to 3.2GHz)
-
-
- <0.7dB, <0.5dB typ. (3.2GHz to 6.5GHz)
-
| -
- Preamplifier On [5]
-
| -
- <0.5dB, <0.3dB typ. (100kHz to 3.2GHz)
-
-
- <0.7dB, <0.5dB typ. (3.2GHz to 6.5GHz)
-
| -
- Input Attenuator
-
| -
- Range
-
| -
- 0dB to 50dB in 1dB steps
-
| -
- Switching Uncertainty [6]
-
| -
- <0.3dB
-
| -
- Absolute Amplitude Uncertainty [7]
-
| -
- <0.3dB
-
| -
- Reference Level Range
-
| -
- Logarithmic Scale
-
| -
- -170dBm to +30dBm in 0.01dB steps
-
| -
- Linear Scale
-
| -
- 707pV to 7.07V, 0.11% (0.01dB)
-
| -
- RBW Switching Uncertainty [8]
-
| -
- <0.1dB (1Hz to 1MHz)
-
<0.3dB (3MHz & 10MHz) -
| -
- Preamplifier
-
| -
- Frequency Range
-
| -
- 100kHz to 3.2GHz
-
| -
- 100kHz to 6.5GHz
-
| -
- Gain
-
| -
- 20dB nom.
-
| -
- Level Measurement Uncertainty [9]
-
| -
- <0.8dB nom.
-
| -
- RF Input VSWR [10]
-
| -
- <1.6:1 nom. (300kHz to 3.2GHz)
-
<1.8:1 nom. (3.2GHz to 6.5GHz) -
| -
- Distortion
-
| -
- Second Harmonic Intercept [11]
-
| -
- +45dBm
-
| -
- Third-Order Intercept [12]
-
| -
- +11dBm, +15dBm typ.
-
| -
- 1dB Gain Compression (P
- 1dB) [13]
-
| -
- >0dBm nom.
-
| -
- Spurious Response
-
| -
- Residual Response [14]
-
| -
- <-90dBm, <-100dBm typ.
-
| -
- Intermediate Frequency
-
| -
- <-60dBc
-
| -
- System Related Sidebands [15]
-
| -
- <-60dBc
-
| -
- Input Related Spurious [16]
-
| -
- <-60dBc
-
| -
- Sweep
-
| -
- Sweep Time
-
| -
- Span ≥ 10Hz
-
| -
- 1ms to 4,000s
-
| -
- Zero Span
-
| -
- 1µs to 6,000s
-
| -
- Sweep Time Uncertainty
-
| -
- Span ≥ 10 Hz, RBW ≥ 1 kHz
-
| -
- 5% nom.
-
| -
- Zero Span (sweep time > 1ms)
-
| -
- 5% nom.
-
| -
- Sweep Mode
-
| -
- Continuous, Single
-
| -
- Trigger
-
| -
- Trigger Source
-
| -
- Free Run, External 1, External 2, Video
-
| -
- Trigger Delay
-
| -
- Span ≥ 10Hz
-
| -
- 0 to 500ms
-
| -
- Zero Span
-
| -
- 0 to 500ms
-
| -
- Tracking Generator ('-TG' models only)
-
| -
- Tracking Generator Output
-
| -
- Frequency Range
-
| -
- 100kHz to 3.2GHz
-
| -
- 100kHz to 6.5GHz
-
| -
- Output Level Range
-
| -
- -40dBm to 0dBm
-
| -
- Output Level Resolution
-
| -
- 1dB
-
| -
- Output Flatness (relative to 50MHz)
-
| -
- ±3dB (nominal)
-
| -
-
REAL-TIME SPECTRUM ANALYSER (RTSA) MODE -
| -
- General Specifications
-
| -
- Real-Time Analysis Bandwidth
-
| -
- 25MHz (standard)
-
40MHz (optional) -
| -
- Min. Signal Duration for 100% POI at Full-Scale Accuracy
-
| -
- 7.45μs [17]
-
| -
- Trace Detector
-
| -
- pos-peak, neg-peak, sample, average
-
| -
- Number of Traces
-
| -
- 6
-
| -
- Window Types
-
| -
- Hanning, Blackman-Harris, Rectangular, Flattop, Kaiser, and Gaussian
-
| -
- Resolution Bandwidth [18]
-
| -
- 100kHz min., 3.21MHz max. (span = 40MHz)
-
62.8kHz min., 2.01MHz max. (span = 25MHz) -
25.1kHz min., 804kHz max. (span = 10MHz) -
2.51kHz min., 80.4kHz max. (span = 1MHz) -
251Hz min., 8.04kHz max. (span = 100kHz) -
| -
- Maximum Sample Rate
-
| -
- 51.2MSa/s
-
| -
- FFT Rate
-
| -
- 146,484/s nom.
-
| -
- Number of Markers
-
| -
- 8
-
| -
- Amplitude Resolution
-
| -
- 0.01dB
-
| -
- Frequency Point
-
| -
- 801
-
| -
- Acquisition Time
-
| -
- >156.5μs (at max. sample rate)
-
| -
- Minimum Signal Duration for 100% POI at Different RBWs
-
| -
- Span
-
| -
- 40MHz
-
| -
- 26.9μs (RBW1), 16.9μs (RBW2), 11.9μs (RBW3), 9.32μs (RBW4), 8.07μs (RBW5), 7.45μs (RBW6)
-
| -
- 25MHz
-
| -
- 38.9μs (RBW1), 22.9μs (RBW2), 14.9μs (RBW3), 10.9μs (RBW4), 8.82μs (RBW5), 7.82μs (RBW6)
-
| -
- 10MHz
-
| -
- 86.8μs (RBW1), 46.8μs (RBW2), 26.8μs (RBW3), 16.8μs (RBW4), 11.8μs (RBW5), 9.30μs (RBW6)
-
| -
- 1MHz
-
| -
- 807μs (RBW1), 407μs (RBW2), 207μs (RBW3), 107μs (RBW4), 56.3μs (RBW5), 31.3μs (RBW6)
-
| -
- Amplitude
-
| -
- Amplitude Flatness
-
| -
- <0.5dB nom. [19]
-
| -
- SFDR
-
| -
- <-60dBc typ.
-
| -
-
 Density -
| -
- Probability Range
-
| -
- 0 to 100% (with a step of 0.1%)
-
| -
- Minimum Span
-
| -
- 5kHz
-
| -
- Persistence Duration
-
| -
- 32ms to 10s
-
| -
- Spectrogram
-
| -
- History Depth
-
| -
- 8,192
-
| -
- Dynamic Range Covered by Bitmap Colour
-
| -
- 200dB
-
| -
- PVT
-
| -
- Minimum Acquisition Time
-
| -
- 187.9μs
-
| -
- Maximum Acquisition Time
-
| -
- 40s
-
| -
- Trigger
-
| -
- Trigger Source
-
| -
- free run, external 1, external 2, power, FMT
-
| -
- FMT
-
| -
- Trigger Diagram
-
| -
- density, spectrogram, normal, PVT
-
| -
- Trigger Resolution
-
| -
- 0.5dB nom.
-
| -
- Trigger Criteria
-
| -
- enter, leave, inside, outside, enter-leave, leave-enter
-
| -
-
GENERAL SPECIFICATIONS -
| -
- Display
-
| -
- Type
-
| -
- capacitive multi-touch screen
-
| -
- Resolution
-
| -
- 1024 × 600 pixels
-
| -
- Size
-
| -
- 10.1"
-
| -
- Colour
-
| -
- 24-bit colour
-
| -
- Printer Support
-
| -
- Protocol
-
| -
- network printer
-
| -
- Memory
-
| -
- Mass Memory
-
| -
- Internal Storage
-
| -
- 512MB nom.
-
| -
- External Storage
-
| -
- USB storage device (not supplied)
-
| -
- Power
-
| -
- Input Voltage Range, AC
-
| -
- 100V to 240V nom.
-
| -
- AC Frequency
-
| -
- 45Hz to 440Hz
-
| -
- Power Consumption
-
| -
- 55W typ., 90W max. with all options
-
| -
- Environment
-
| -
- Temperature Range
-
| -
- Operating
-
| -
- 0℃ to 50℃
-
| -
- Storage
-
| -
- -20℃ to 70℃
-
| -
- Humidity
-
| -
- ≤95% RH (0℃ to 30℃)
-
≤75% RH (30℃ to 40℃) -
| -
- Altitude
-
| -
- below 3,048m (10,000 feet)
-
| -
- Electromagnetic Compatibility and Safety
-
| -
- EMC
-
| -
- complies with EMC Directive 2014/30/EU,
-
complies with or above the standard specified in IEC61326-1:2013/EN61326-1:2013 Group 1 Class A -
| -
- CISPR 11/EN 55011
-
| -
- IEC 61000-4-2:2008/EN61000-4-2
-
| -
- ±4.0kV (contact discharge), ±8.0kV (air discharge)
-
| -
- IEC 61000-4-3:2002/EN61000-4-3
-
| -
- 3V/m (80MHz to 1GHz); 3V/m (1.4GHz to 2GHz); 1V/m (2.0GHz to 2.7GHz)
-
| -
- IEC 61000-4-4:2004/EN61000-4-4
-
| -
- 1kV power
-
| -
- IEC 61000-4-5:2001/EN61000-4-5
-
| -
- 0.5kV (phase-to-neutral voltage); 1kV (phase-to-earth voltage); 1kV (neutral-to-earth voltage)
-
| -
- IEC 61000-4-6:2003/EN61000-4-6
-
| -
- 3V, 0.15 to 80MHz
-
| -
- IEC 61000-4-11:2004/EN 61000-4-11
-
| -
- voltage dip: 0% UT during half cycle; 0% UT during 1 cycle; 70% UT during 25 cycles
-
short interruption: 0% UT during 250 cycles -
| -
- Safety
-
| -
- complies with IEC 61010-1:2010 (Third Edition)/EN 61010-1:2010, UL 61010-1:2012 R4.16 and CAN/CSA-C22.2 No. 61010-1-12+ GI1+ GI2
-
| -
- Environmental Stress
-
| -
- Samples of this product have been type tested in accordance with RIGOL's reliability test regulations and verified to be robust against the environmental stresses of storage, transportation, and end-use; those stresses include, but are not limited to, temperature, humidity, shock, and vibration. The test methods are compliant with standards specified in GB/T6587 Class 2 and MILPRF-28800F Class 3.
-
| -
- Size
-
| -
- (W x H x D)
-
| -
- 410 × 224 × 135mm
-
| -
- Weight
-
| -
- Without Tracking Generator
-
| -
- 4.65kg
-
| -
- With Tracking Generator
-
| -
- 4.95kg
-
| -
- Calibration Interval
-
| -
- Recommended Calibration Interval
-
| -
- 18 months
-
| -
-
INPUT / OUTPUT -
| -
- Front Panel Connector
-
| -
- RF Input
-
| -
- Impedance
-
| -
- 50Ω nom.
-
| -
- Connector
-
| -
- N-type female
-
| -
- TG Output
-
| -
- Impedance
-
| -
- 50Ω nom.
-
| -
- Connector
-
| -
- N-type female
-
| -
- Internal / External Reference
-
| -
- Internal Reference
-
| -
- Frequency
-
| -
- 10MHz
-
| -
- Output Level
-
| -
- +3 dBm to +10 dBm, +7 dBm typ.
-
| -
- Impedance
-
| -
- 50Ω nom.
-
| -
- Connector
-
| -
- BNC female
-
| -
- External Reference
-
| -
- Frequency
-
| -
- 10MHz ± 5ppm
-
| -
- Input Level
-
| -
- 0dBm to +10dBm
-
| -
- Impedance
-
| -
- 50Ω nom.
-
| -
- Connector
-
| -
- BNC female
-
| -
- External Trigger Input / Output
-
| -
- External Trigger Input 1
-
| -
- Impedance
-
| -
- ≥1kΩ nom.
-
| -
- Connector
-
| -
- BNC female
-
| -
- Level
-
| -
- 5V TTL level
-
| -
- External Trigger Input 2 / Trigger Output
-
| -
- Impedance
-
| -
- ≥1kΩ nom. (on trigger input)
-
50Ω nom. -
| -
- Connector
-
| -
- BNC female
-
| -
- Level
-
| -
- 5V TTL level
-
| -
- IF Output
-
| -
- IF Output
-
| -
- Frequency
-
| -
- 430MHz ± 20MHz nom.
-
| -
- Amplitude [20]
-
| -
- PRFin ± 4dB nom. (50MHz)
-
PRFin ± 4 dB + RF frequency response (other frequencies) nom. -
| -
- Impedance
-
| -
- 50Ω nom.
-
| -
- Connector
-
| -
- SMB male
-
| -
- Communications Interfaces
-
| -
- USB Host (4 ports)
-
| -
- Connector
-
| -
- A plug
-
| -
- Protocol
-
| -
- version 2.0
-
| -
- USB Device
-
| -
- Connector
-
| -
- B plug
-
| -
- Protocol
-
| -
- version 2.0
-
| -
- LAN
-
| -
- Connector
-
| -
- 100/1000Base, RJ-45
-
| -
- Protocol
-
| -
- LXI Core 2011 Device
-
| -
- USB Host (4 ports)
-
| -
- Connector
-
| -
- A plug
-
| -
- Protocol
-
| -
- HDMI 1.4b
-
|
- [1] 0⁰C to 50⁰C, referenced to 25⁰C
-
[2] 20℃ to 30℃，fc = 500MHz -
[3] attenuation = 0dB, sample detector, trace averages ≥ 50, tracking generator off, normalized to 1Hz, 20℃ to 30℃ , input impedance = 50Ω -
[4] attenuation = 10dB, relative to 50MHz, 20℃ to 30℃ -
[5] attenuation = 0dB, relative to 50MHz, 20℃ to 30℃ -
[6] fc = 50MHz, relative to 10 dB, preamp off, 20℃ to 30℃ -
[7] fc = 50MHz, peak detector, preamp off, attenuation = 10dB, input signal level = -10dBm, 20℃ to 30℃ -
[8] Set 'Sweep Time Rule' to 'Accy', relative to 30kHz RBW -
[9] 95% confidence level, S/N > 20dB, RBW = VBW = 1kHz, preamp off, attenuation = 10dB, -50dBm < input level ≤ 0dBm, fc > 10MHz, 20℃ to 30℃ -
[10] attenuation ≥10dB, preamp off -
[11] fc ≥ 50MHz, input signal level = -20dBm, attenuation = 0dB, preamp off. -
[12] fc ≥ 50MHz, two -20dBm tones at input mixer spaced by 200kHz, attenuation = 0dB, preamp off. -
[13] fc ≥ 50MHz, attenuation = 0dB, preamp off. -
[14] input terminated with a 50Ω load, attenuation = 0dB, 20℃ to 30℃ -
[15] referenced to local oscillators, referenced to A/D conversion, referenced to subharmonic of first LO, referenced to harmonic of first LO -
[16] mixer level = -30dBm -
[17] maximum span, default Kaiser window -
[18] provides 6 RBWs for each window, except the Rectangular; for Kaiser window -
[19] Only applicable to the Normal measurement -
[20] RF input power (PRFin) ≤ -10 dBm, attenuation = 0, preamp off
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
 technology- Displayed average noise level (DANL): <-165dBm (typical)
- Phase noise: <-108dBc/Hz @ 10kHz (typical, f = 1GHz)
- Level measurement uncertainty: <0.8dB
- Built-in trackinggenerator ('-TG' models only)
- Minimum RBW: 1Hz
- EMC filter and quasi-peak detector
- Various measurementfunctions
- Multiple measurement modes
- Up to 40MHz real-time analysis bandwidth
- Multiple triggermodes and trigger masks Density, spectrogram, and other display modes
- 10.1'' capacitive multi-touchscreen, supporting touch gestures
- USB, LAN, HDMI and other communication and display interfaces
- Suppliedwith... Power cable & quick guide
- Options include... Preamplifier, high-stability reference, 40MHz real-time /analysis bandwidth, advanced measurement kit
- Optional PC software... Ultra Spectrum, S1210 EMI Pre-Compliance Test
- Accessories include... Rack mount kit
|
|
|
|
|
|
|