Ideal for in-house EMC pre-compliance tests and EMC training in the lab, college or university - Tekbox EMCview is user-friendly PC software for EMC pre-compliance testing of radiated and conducted emissions. It is a perfect complement for automated testing using Tekbox LISNs and TEM Cells.
Built-in amplitude correction enables correction and conversion coefficients for cables, amplifiers, attenuators, LISNs, TEM cells, antennas, RF current probes, striplines and capacitive coupling clamps.
There's no need for time consuming setup. The software is ready for measurements straight after installation. All emission related CISPR-xx (EN550xx) limits and a few automotive manufacturer standards are pre-configured in corresponding project files.
The graph supports two complete measurement runs such as, for example, Average / Quasi-Peak or Peak / Quasi Peak and alternatively a fast Quasi-Peak scan of critical peaks.
Try before you buy... Download EMCview for FREE using the link found under the 'DOCUMENTS, SOFTWARE & VIDEOS tab. EMCview can be used up to 10MHz without a licence.
For further information, please refer to the EMCview manual, located under the 'DOCUMENTS, SOFTWARE & VIDEOS' tab, above.
- The latest version of EMCview is v04.04.
- EMCview is compatible with all Rigol DSA700 series, DSA800 series, RSA3000 series and RSA5000 series spectrum analysers.
- The spectrum analyser must have an active EMI filter and Q-P detector licence (EMI-DSA800).
- One EMCview licence is required per spectrum analyser. The serial number of your spectrum analyser must be supplied at the time of order. Please enter the serial number into the 'Order Comments' box during the Checkout process. If this licence is being purchased with a new spectrum analyser, it will be assumed that the licence is to be used with the new spectrum analyser, unless a statement is made to the contrary in the 'Order Comments' box.