Home > Test & Measurement > Current Transducers
We found 29 results matching your criteria.

Precision Zero Flux Current Transducers


DaniSense DS Series Current Transducers are based on a flux-gate zero flux detector with closed-loop operation to provide a signal output current accurately defined by the number of turns in the compensation winding. They provide higher accuracy for power analyser measurements and improved performance for power amplifiers, signal analysis, automotive applications,Inverter drives development and current calibration.
Sort By:
Page of 1
Danisense DS600 current measurement sensor Danisense DS600

DS600 is member of the small housing sensor family. The family includes a 200A (1:500) and a 600A (1:1500) version.

Danisense DS2000 current measurement sensor Danisense DS2000

DS 2000 is developed to offer extreme linearity and full industrial temperature range.

Danisense DS5000 Fluxgate current transducer Danisense DS5000

The DS5000 is developed for very high current applications. It has all the protection of a smaller transducer, but also comes with an optional high precision burden board. (The board converting current to a 10V output voltage) With 150mm diameter in the center hole, most applications/primary conductors will fit. The standard configuration includes a 5m long cable between 19” Control Unit and Transducer Head and a mains cable.

DSSIU-4 Four Channel System Interface Unit Danisense DSSIU-4

DSSIU-4 is an interface unit capable of integrating up to 4xDS2000 into a complete current measuring system.

Danisense Power Supply Cable Danisense Power Supply Cable

A 5m (15ft) long power supply cable to be used with a standard DC Power Supply

Danisense Signal Output Cable Danisense Signal Output Cable

A 2m (6ft) long shielded signal output cable

Danisense Power Supply Cable Danisense Power Supply Cable

A 3m long power supply cable to be used with a standard DC Power Supply

Danisense DS200 current measurement sensor Danisense DS200ID

DS200 is member of the small housing sensor family. The family includes a 200A (1:500) and a 600A (1:1500) version.

Danisense DC200IF Precision Current Sensor Danisense DC200IF Precision Current Sensor

Highly stabilised and precise fluxgate technology based current transducer, re-engineered for sensitivem non-intrusive, isolated DC and AC current measurement applications up to 300A.

Danisense DS50ID Current Transducer Danisense DS50ID Current Transducer

Ultra-stable, high precision (ppm class) fluxgate technology DS series current transducer for non-intrusive, isolated DC and AC current measurement up to 150A

Danisense DS200ID Current Transducer Danisense DS200ID Current Transducer

Ultra-stable, high precision (ppm class) fluxgate technology DS series current transducer for non-intrusive, isolated DC and AC current measurement up to 370A

Danisense DS300ID Current Transducer Danisense DS300ID Current Transducer

Ultra-stable, high precision (ppm class) fluxgate technology DS series current transducer for non-intrusive, isolated DC and AC current measurement up to 500A

Danisense DS400ID Current Transducer Danisense DS400ID Current Transducer

Ultra-stable, high precision (ppm class) fluxgate technology DS series current transducer for non-intrusive, isolated DC and AC current measurement up to 600A

Danisense DS600ID Current Transducer Danisense DS600ID Current Transducer

Ultra-stable, high precision (ppm class) fluxgate technology DS series current transducer for non-intrusive, isolated DC and AC current measurement up to 1000A

Danisense DQ500ID Current Transducer Danisense DQ500ID Current Transducer

Ultra-stable, high precision (ppm class) fluxgate technology DS series current transducer for non-intrusive, isolated DC and AC current measurement up to 800A

Danisense DQ600ID Current Transducer Danisense DQ600ID Current Transducer

Ultra-stable, high precision (ppm class) fluxgate technology DS series current transducer for non-intrusive, isolated DC and AC current measurement up to 1000A

Danisense DQ640ID-B Current Transducer Danisense DQ640ID-B Programmable contact free flux gate based on current measurement sensor - up to 640A DC

Programmable contact free flux gate based current measurement sensor - up to 640A DC

Danisense DQ600ID-P1300 Current Transducer Danisense DQ600ID-P1300 Ultra-stable, high precision (ppm class) fluxgate technology DS series current transducer for non-intrusive, isolated DC and AC current measurement up to 1300A

ultra-stable, high precision (ppm class) fluxgate technology DS series current transducer for non-intrusive, isolated DC and AC current measurement up to 1300A

Danisense DS200ID-CD100 Current Transducer Danisense DS200ID-CD100 Current Transducer

Ultra-stable, high precision (ppm class) fluxgate technology DS series current transducer for non-intrusive, isolated DC and AC current measurement up to 370A

Danisense DS200ID-CD1000 Current Transducer Danisense DS200ID-CD1000 Current Transducer

Ultra-stable, high precision (ppm class) fluxgate technology DS series current transducer for non-intrusive, isolated DC and AC current measurement up to 370A

Danisense DS600ID-CD100 Current Transducer Danisense DS600ID-CD100 Current Transducer

Ultra-stable, high precision (ppm class) fluxgate technology DS series current transducer for non-intrusive, isolated DC and AC current measurement up to 1000A

Danisense DS50UB-1V Current Transducer Danisense DS50UB-1V Current Transducer

Ultra-stable, high precision (ppm class) fluxgate technology DS series current transducer for non-intrusive, isolated DC and AC current measurement up to 100A

Danisense DS50UB-10V Current Transducer Danisense DS50UB-10V Current Transducer

Ultra-stable, high precision (ppm class) fluxgate technology DS series current transducer for non-intrusive, isolated DC and AC current measurement up to 50A

Danisense DS200UB-1V Current Transducer Danisense DS200UB-1V Current Transducer

Ultra-stable, high precision (ppm class) fluxgate technology DS series current transducer for non-intrusive, isolated DC and AC current measurement up to 330A

Danisense DS200UB-10V Current Transducer Danisense DS200UB-10V Current Transducer

Ultra-stable, high precision (ppm class) fluxgate technology DS series current transducer for non-intrusive, isolated DC and AC current measurement up to 220A

Danisense DS400UB-10V Current Transducer Danisense DS400UB-10V Current Transducer

Ultra-stable, high precision (ppm class) fluxgate technology DS series current transducer for non-intrusive, isolated DC and AC current measurement up to 283A

Danisense DS600UB-1V Current Transducer Danisense DS600UB-1V Current Transducer

Ultra-stable, high precision (ppm class) fluxgate technology DS series current transducer for non-intrusive, isolated DC and AC current measurement up to 950A

Danisense DS600UB-10V Current Transducer Danisense DS600UB-10V Current Transducer

Ultra-stable, high precision (ppm class) fluxgate technology DS series current transducer for non-intrusive, isolated DC and AC current measurement up to 660A

Danisense DS1000UB-10V Current Transducer Danisense DS1000UB-10V Current Transducer

Ultra-stable, high precision (ppm class) fluxgate technology DS series current transducer for non-intrusive, isolated DC and AC current measurement up to 1100A